New and used food processing, packaging & materials handling machinery
+61 3 9791 7011
Process Plant Network - Food processing & food packaging machinery
Dryers   >   Changzhou Kodi Machinery Co. ltd Spray Dryer NG50
Get a quote Ask a question

Changzhou Kodi Machinery Co. ltd Spray Dryer NG50

This machine is still installed at a large Food Manufacturer in, Campbellfield, VIC.
It was manufacturing specialist flavours and for snack foods (like a honey soy flavour and beef stock flavour, etc).The system can also be used for manufacture of egg powder, stevia, yeast powder

The system can produce approximately 40 - 50Kg/hr of spray dried powder (product dependent) at 1 - 2% residual moisture level.
The heat source is Natural Gas.

The full system is comprised of:
1. 1,000L Liquid Mixing Tank with Agitator that can be raised and lowered into the mix tank + Forklift attachment for Drum Lifter (to pour 200L drums into tank)
2. Progressive Cavity Pump (Mono style pump)
3. Natural Gas Fired Heat Exchanger with REILO Burner (approved for AU gas use in Victoria)
4. Spray Dryer Chamber with Rotating/Centrifugal Atomising Nozzle
5. Explosion/Flameless Vent to absorb any flame explosions
6. Centrifugal Air Blower to control air flow through main chamber with Primary and Secondary HEPA Air Filters for incoming air
7. Transfer Blower for Powders (including dehumidifier)
8. 1st Powder Cyclone Separator with Rotary Valve
9. 2nd 1st Powder Cyclone Separator with Rotary Valve (final product into bag)
10. Water Scrubber with pump to remove any dust or powders going into atmosphere
11. Vibratory Sieve to screen powders
12. Hanging Semi Automatic Bag Stitcher
13. Various Scoops, SS Racks and Sieves
14. Main Control Panel with PLC and Touchscreen and Recipe Control

The equipment can be inspected at the factory Campbellfield Site by appointment.
The last production run is due to take place end of Oct to mid November, 2025.
Machinery is ready for dismantling and sale end of November 2025.
Disconnection, Packing Up and Pulling out of the equipment is to the buyers account.
PPN can arrange to dismantle and transport the equipment or the Buyer can arrange their own crew to do this with assistance/supervision from the company staff.

NOTE: The main spray dryer chamber will need the roof pulled off, the vessel craned out and then the roof put back in place.

The price of the complete system (excluding disconnection, dismantling and transport) is $295,000 + GST.
Machinery is sold "as is, where is" with all faults if any - as inspected by buyer.

TECHNICAL SPECIFICATIONS (from KODI website):

The KODI TPG Flavor Spray Dryer is a high-performance spray drying solution designed specifically for the food, pharmaceutical, and chemical industries. Engineered to produce powder, granules, or block solids from solutions, emulsions, suspensions, and pumped pastes, the TPG model ensures precision in granule size, final moisture, bulk density, and shape. With specialized modifications for flavor applications, it delivers exceptional purity and powder yield, making it ideal for high-quality flavor production.

Key Features & Benefits
- Optimized for Flavor Applications – Modified TPG model enhances flavor powder production for superior taste and aroma retention.
- High Yield & Purity – Achieves up to 99.9% powder yield for malt dextrin with A-grade purity according to American standards.
- Versatile Product Applications – Capable of processing egg powder, amino acids, proteins, food flavors, pectin, spirulina, herbal extracts, pigments, cocoa, malt dextrin, collagen, juice, coffee, creamer, coconut, milk, gelatin, gum, and acacia.
- Rapid Drying Process – High-efficiency atomization and direct contact with hot air ensures fast moisture evaporation while maintaining product quality.
- Continuous Operation – Powder is discharged continuously from the drying tower and cyclone collector for consistent productivity.
- Flexible Heating Sources – Compatible with electricity, LPG, natural gas, oil, or steam, adapting to various production setups.
- Sanitary & Easy to Clean – Designed for hygienic operation, reducing contamination risk in food and pharmaceutical processes.

Technical Specifications
- Inlet Air Temperature: ≤ 350°C
- Outlet Air Temperature: 80–90°C
- Evaporation Capacity: 50 kg/h
- Atomizer Type: Mechanical drive
- Rotary Speed of Atomizer: 21,500 rpm
- Diameter of Atomizer Disc: 120 mm
- Heating Source Options: Electricity, LPG, Natural Gas, Oil, Steam
- Dry Powder Yield: ≥ 95%

Applications
- The KODI TPG Flavor Spray Dryer is widely used in industries such as:
- Food & Beverage: egg powder, coffee, creamer, soy sauce, coconut, milk, juice
- Pharmaceutical & Nutraceutical: protein powders, amino acids, collagen, herbal extracts
- Chemical & Specialty Products: pigments, aluminum oxide, oil powders, paraffin wax, PVC powders
- Traditional Chinese Medicine & Natural Products: herbal extractions, powdered medicinal products

Why Choose This Machine
- Specialized design for flavor powders ensures product consistency, taste, and aroma
- High efficiency with minimal moisture content and precise granule size
- Flexible operation with multiple heating sources and continuous discharge
- Robust, sanitary design reduces downtime and cleaning effort
- Proven performance in flavor, food, pharmaceutical, and chemical processing... 
Model NG50
Size/Capacity 50kg/hr (product dependant)
Stock number DRYE25106N
Condition Used
Year of manufacture 2020
Get an instant quote
Ask a question about this item
Join our email list
We'll keep you up to date with our latest machinery acquisitions. Unsubscribe at any time.

THE PPN ADVANTAGE

Fully serviced

Production ready

Backed by warranty

We supply our used machinery fully serviced, production ready and backed by warranty. This is included in our initial quotation.

Why leading manufacturers choose us for their projects

Free comprehensive summary quote including scale engineering drawing

We will design a complete system based on your product, floor plan, budget and time frame. Our proposals include a summary quote and a scale engineering drawing.

We commission your system plug-n-play and production ready

Our engineers are able to design your system to fit the floorplan of your plant, then build, configure and test it in our shop before delivering it plug-n-play on arrival.

Factory acceptance testing

See your complete line running your product and/or packaging in our shop before it is delivered to your plant. This allows you to make those final critical changes that often make all the difference. You can be confident your machinery will be production ready after installation.

Training

Our engineers can train your staff in our shop, or we can provide on-site commissioning and training.

You might also be interested in...

Fluid Bed Dryer

The IOPAK GFGQ -300 Fluid Bed Dryer has many uses within the food, pharmaceutical and chemical industries and is simple to operate and clean. Fluid

Spray Dryer

This unit appears to be the older version of the PULVIS GB 210-A which will be confirmed upon arrival Product Summary Capable of drying ultra small

Air Knife with Blower

415V 50Hz 7A 3~

Air Knife with Blower

415V 50Hz 5A 3~

Processing Machinery
Packaging Machinery

Materials Handling
ISO 9001 Certified Company

Websites
Process Plant Network
Iopak Machinery
Iopak Spare Parts
Process Plant Network Pty Ltd

Email
sales@processplant.com

Telephone
+61 3 9791 7011

Showroom
3-5 Capital Drive
Dandenong South
Victoria 3175
AUSTRALIA

Postal Address
PO Box 4097
Dandenong South
Victoria 3164
AUSTRALIA

Terms and Conditions   |   Return Policy for Online Orders   |   Privacy Policy

© Copyright 2025 Process Plant Network Pty Ltd

Disclamer: All measurements, weights, illustrations and specifications are subject to alteration without notice.