Cappers

Compact rotary cap tightener runs using 2 capping heads made by GPG (Model: 4RK40GN-C) . Motor details: 40W 220V, 50Hz, 0.4A, 1200rpm Current tooling identified: - 1.5L Hourglass start wheel - 108mm dia. - Star wheel - 105mm dia. Cap infeed: 1050mm off ground Bottle infeed: 150mm W x 900mm off ground

Elevator: Model: ELEVATORE MECCANICO S/N: 14365 Speed: 10800 bph Weight: 500kg Electrical data - 415V - 50Hz - 24V Aux - Board: 0.2kW - Belt motor: 0.4kW - Linear Vibrator: 0.40kW - Total: 0.75kW Infeed height: 1349mm Discharge height: 2664.8mm External dimensions: 2346.76mm L x 1000mm W x 3249mm H Applicator Model: DART R PP S/N: 14364 Pitch: 420mm Direction of rotation: C

Variable speed Adjustable torque control 6-08 Bar compressed air required Capable of handling a large variety of bottle and cap sizes Speeds of up to 40/min 240V main supply required 3 year warranty Easy to setup and low maintenance 1 Set of bottle clamps and tightening chuck included Anodised aluminium and stainless construction Designed to fit over existing conveyors Standalone self-s

Speed: Up to 40 - 45 caps/min Air Requirements: 6 - 8 Bar (Compressed Air) Power Requirements: 1-Phase, 240V, 50Hz Features: - Variable speed - Machine controlled via adjustable timers for capping time and clamp timing - Capable of handling large variety of bottle and cap sizes - Easy to setup and low maintenance - 1 Set of bottle clamps and rollers included - Clamp assembly adjustable

Speed: Up to 40 - 45 caps/min Air Requirements: 6 - 8 Bar (Compressed Air) Power Requirements: 1-Phase, 240V, 50Hz Features: - Variable speed - Machine controlled via adjustable timers for capping time and clamp timing - Capable of handling large variety of bottle and cap sizes - Easy to setup and low maintenance - 1 Set of bottle clamps and rollers included - Clamp assembly adjustable

The CVC1208 Retorquer is designed to retighten screw-on caps after induction sealing at speeds of up to 120 bottles per minute. The 1208 is PLC controlled and comes standard with a 6" Touch Screen terminal. Features: - Full stainless steel unit - Fully adjustable - Touch screen controls - Guarded - Mobile and suitable to go over conveyor PLEASE NOTE CONVEYOR IN PHOTOS NOT SUPPLIED.

The CVC1208 Retorquer is designed to retighten screw-on caps after induction sealing at speeds of up to 120 bottles per minute. The 1208 is PLC controlled and comes standard with a 6" Touch Screen terminal. Features: - Full stainless steel unit - Fully adjustable - Touch screen controls - Guarded - Mobile and suitable to go over conveyor

This automatic 4 head ZALKIN capper was handling 28 mm plastic caps for 2 Litre PET bottles. The Pick-N-Place capper delivers optimum performance across a wide range of cap and bottle styles. Bottles are kept on plane with neck support whilst the cap is delivered in the capping chuck. Features of this unit are: Screw, snap and snap-screw caps on the same machine. Quick change capping chu

Specifications Cap Type: Screw Cap Diameter: 20 - 110 mm Bottle Diameter: 20 - 110 mm Bottle Height: 50 - 260 mm Capping Speed: 10 - 20 caps/min (Packaging Materials and Operator Dependent) Air Pressure Requirements: 2 - 6 Kg/sqcm Power Supply: 1-Phase, 220V, 50Hz Features 1. Equipped with rubber on the bottom to diminish cap breakage. 2. Sealing pressure can be adjusted by torques to suits for v

Specifications Capacity: Up to 100 bpm (Product and Cap Dependent) Cap Types: Three, Four, Six Twist-Off Caps Cap Diameters: 30 - 90 mm Bottle Height: 65 - 260 mm Power Consumption: 3.47 kW Steam Consumption: 180 - 230 Kg/Hr Steam Pressure: ≤ 0.4 MPa Max. Vacuum: 34 - 67 KPa Cap Elevator: Included

<Specifications> Capacity: 20 - 30 caps/min (Bottle & Cap Size Dependent) Air Requirements: 2 - 6 Kg/sqcm Power Supply: 1-Phase, 240V, 50Hz One Bottle/Cap Size Tooling with One Set of Star Wheel Included. Please note, this is not suitable for ROPP caps. <Features> - Automatic cap feeding system with cap elevator (level sensor for hopper) - Suitable for screw cap tightening - Cap tightening syste

This ASAHI JIDOKI was part of a cosmetic plant. Speed of Line: Approximately 20 - 40 bottles/min (product dependent). Features: Low level design with open structure Safety guarding around capping system Vibratory bowl unscrambler PLC Control "No cap, reject bottle" automatic reject system Full s/s construction Easy to setup, maintain and clean

Specifications Capacity: Up to 100 bpm (Product and Cap Dependent) Cap Types: Three, Four, Six Twist-Off Caps Cap Diameters: 30 – 90 mm Bottle Height: 65 – 260 mm Power Consumption: 3.47 kW Steam Consumption: 180 – 230 Kg/Hr Steam Pressure: &#8804; 0.4 MPa Max. Vacuum: 34 – 67 KPa Cap Elevator: Included

Capacity: Up to 20 caps/min (Product Dependent) Capping Head: Adjustable (Up/Down & Left/Right) Gating System On Castors.

Capacity: 20 - 25 bottles/min (Product and Fill Volume Dependent) Cap Size: Please advise the size/s Features: - Servo motor - Air required for capping head - Digital Input - Adjustable torque setting - Gating system (air required) - Sensor detection The final price is subject to confirming the project scope

JUST THE RIGHT TORQUE FOR ALL YOU HONEY,OIL SAUCE, SOUP & COSMETIC MANUFACTURERS - THIS GREAT LITTLE USED CAPPER IS FOR YOU! You have to cap immediately after filling - correct? The bottleneck caused by hand capping can result in contamination and spoilage - and then you have the added burden of leaking containers. Let the IOPAK Pneucap CT-2 Semi -Automatic Capper solve all your capping proble

JUST THE RIGHT TORQUE FOR ALL YOU HONEY,OIL SAUCE, SOUP & COSMETIC MANUFACTURERS - THIS GREAT LITTLE CAPPER IS FOR YOU! You have to cap immediately after filling - correct? The bottleneck caused by hand capping can result in contamination and spoilage - and then you have the added burden of leaking containers. Let the IOPAK Pneucap Semi -Automatic Capper solve all your capping problems. It can