New and used food processing, packaging & materials handling machinery
WhatsApp +61 3 9791 7011
24 SEPTEMBER 2020   WE ARE FULLY OPERATIONAL AND OPEN FOR BUSINESS

Lightnin 1,000L Mixing Tank

This cylindrical, vertical SUS tank was used to mix ingredients in a food manufacturing plant. Outlet: 3'' ID, sited horizontally at center of tank base. Tank height (minus motor mixer assembly), 1800 mm. Power: 3 Phase, 10 A, 50 Hz External Dimensions: 1100mm L x 1160mm W x 2370mm H...

IOPAK 10,000L Storage Tank with Stirrer

Specifications: Tank Diameter: 2,300 mm Tank Depth: 2,500 mm Overall Height: 3,000 mm Outlet Height from Floor: 250 mm Manhole Diameter: 600 mm Product In/Outlet Diameter: 50 mm (2 inch) CIP Diameter 38mm 304 stainless steel Not Jacketed Electrical: 3 Phase, 415 Volts, 3Kw, 49RPM These are made new to order, with an approx. 3 months lead time. ...

Australian Made 500 L tank with dished sealable lid

This tank was used in a food manufacturing plant. It is extremely sturdy, being constructed of thicker plate than is usual. 500L (550L overall) Dimensions: 1050mm Dia. x 605mm Bottom sloping towards 50mm side outlet. Fitted with 2 sightglasses, one in either side. Sight glasses are graduated to 500L The lid is dished and is fitted with a seal and s/s clamps. The tank has 3 legs and they...

Australian Made Holding Tank (SUS)

Stainless steel construction, featuring removable top cap for inspection and cleaning. Outlet located under tank, 1.75 inch (45mm). Inlet installed on tank cap/lid via right-angle 1.75 inch (45mm) ID ferrule fitting. Vent tube, 20mm ID located next to inlet. Provision for level sensor via 2 inch (50mm) BSPT port in tank lid. Tank supported with 4 post hardstand. 1,050 x 1,050mm Dim...

Australian Made Holding Tank for Packing

All Stainless Steel Construction ...

IOPAK NEW 1,000L Holding Tank (conical bottom, lids & 2" butterfly valve)

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with half moon lids. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fu...

IOPAK NEW 1,000L Holding Tank (conical bottom, lids & 2" butterfly valve)

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with half moon lids. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fu...

IOPAK NEW 2500L Forkliftable Storage Tank (Conical Bottom)

Specifications Total Volume: 2,500 Ltr Material Construction: SUS304 Outlet: 4" Butterfly Valve Included Accessories: - 38mm CIP - 2" Inlet - Manhole Dimensions: 1,556 x 1,556 x 2,954 mm (l x w x h) ...

IOPAK NEW 250L Holding Tank (conical bottom, lid & 2" butterfly valve)

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Standard M...

IOPAK NEW 250L Holding Tank (conical bottom, lid & 2" butterfly valve)

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Standard M...

IOPAK NEW 250L Holding Tank (conical bottom, lid & 2" butterfly valve)

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Standard M...

IOPAK NEW 500L Holding Tank (conical bottom, lid & 2" butterfly valve)

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. St...

IOPAK NEW 500L Holding Tank (conical bottom, lid & 2" butterfly valve)

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Standard M...

IOPAK NEW 500L Holding Tank (conical bottom, lid & 2" butterfly valve)

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Standard M...

FURPHY S/S Tote Bin

This fully stainless steel constructed tote bin features a 375mm ID Hinged Inlet on the upper surface, conical base and a 200mm dia discharge arrangement. The outlet is fitted with a 200mm slide gate valve. Support frame work is fabricated of tubular section and the entire system is mounted on wheels and castors. Fork hoist tine receptacles are fitted for transportation when filled. Foot...

FURPHY S/S Tote Bin

This fully stainless steel constructed tote bin features a 375mm ID Hinged Inlet on the upper surface, conical base and a 200mm dia discharge arrangement. The outlet is fitted with a 200mm slide gate valve. Support frame work is fabricated of tubular section and the entire system is mounted on wheels and castors. Fork hoist tine receptacles are fitted for transportation when filled. Footprint ...

IOPAK Single Skin Contra-Rotating Tank

- Effective Volume: 1000 Ltr - Total Volume: 1430 Ltr - Material: SUS304 - Material Thickness: 4mm - 80-Degree Conical Base - Upper Reducer: 1.1Kw/49rpm - Lower Reducer: 3Kw/29rpm - 4" Pneumatic Ball Valve, Triclover Fitting - Two (2") x 51mm Diameter Inlets - Comes with 2 Lids, 2 Safety Grids, 4 Legs...

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors. Manufactured 2003...

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors. Manufactured 2003...

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors....

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors. Manufactured 2003...

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors....

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors. Manufactured 2003...

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors. Manufactured 2003...

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors. Manufactured 2003...

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors. Manufactured 2003...

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors. Manufactured 2003...

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY.. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors. Manufactured 2003...

Ruberg Tote Bin

This German manufactured mobile holding or Tote bin was used in a cereal factory in Australia in conjunction with a mixer (not available). Capacity: 750L NB Each bin sold SEPERATELY. Dimensions: 1,040 x 1,040 x 1,900mm (l x w x h) Inlet 340mm in diameter Slide gate discharge with butterfly valve 500mm diameter. Mobile on castors. Manufactured 2003...