IOPAK 1" ROTARY LOBE PUMP This brand new IOPAK rotary lobe pump, is reliable and very reasonably priced! FEATURES * It designed to handle viscous or sensitive products with large particulates. * The butterfly curve of the rotor, ensures a characteristic smooth low shear pumping action. * This leads to the gentle throughput of delicate and sensitive products, without crushing or breaking t...
TECHNICAL SPECS: Diaphragms: PTFE Maximum fluid working pressure: 120 psi (8.0 bar, 0.8 MPa) Maximum flow rate : 41 gpm (159 L/m) Max Pumpable Solids: 3.2mm (1/8") **** Actual pump performance may be affected by prolonged usage at temperature Refer to the attached brochure for more details. Part No.: FD1111...
TECHNICAL SPECS Maximum fluid working pressure: 120 psi (8.4 bar, 0.84 MPa) Maximum free flow delivery*: 100 gpm (378.5 lpm) Maximum pump speed: 200 cpm Displacement per cycle**: 0.5 gallon (1.96 liter) Maximum suction lift (DB2366): 20 ft (6.1 m) dry Maximum size pumpable solids: 0.19 in (4.8 mm) Maximum operating temperature***: Geolast - 150°F (65.5°C) Typical sound leve...
This brand new IOPAK 2" (51mm) self priming positive displacement pump has all contacts fabricated of AISI316 s/s.Self-priming pumps create and maintain a sufficient vacuum level to draw fluid with no external assistance. * As a positive displacement pump, it is able to handle product mixed with air as well as product with a liquid level below the pump. * This pump is useful in the milking ...
The GRACO SaniForce 1590 2" Air Operated Double Diaphragm Pump is much used in the food industry. It is useful for the following functions/foods: Concentrated fruit juice, sauces, pastes, starches, wine,jams, jellies,oils - Evacuation of food from mixing kettles - Transferring from original containers to mixing tanks - High Volume Evacuation of liquid concentrated from holding vessels - Repac...
IOPAK 2" JACKETED ROTARY LOBE PUMP is fitted with a HOPPER which is often requested on confectionery, bakery or sauce lines. It can be pushed from either side as it is skid mounted with handles at each end. This BRAND NEW rotary lobe pump comes with an ABB motor. The specification of the pump is as follows: Contact material SUS316 Lobe Pump Flow: 5600 - 11,000 litres / hr. (subject to pro...
IOPAK 2" ROTARY LOBE PUMP This brand new IOPAK rotary lobe pump, is reliable and very reasonably priced! FEATURES * It designed to handle viscous or sensitive products with large particulates. * The butterfly curve of the rotor, ensures a characteristic smooth low shear pumping action. * This leads to the gentle throughput of delicate and sensitive products, without crushing or breaking t...
This brand new IOPAK sanitary centrifugal pump is used mainly in the food and dairy industries to deliver liquid in smaller flow with high pressure and high pressure filtering. Flow Rate: 20,000L/Hr Pump Head: 24m (water used as product) Inlet/Outlet: 51mm NM - 50 Motor: ABB 4kW, 3 Phase Food Sanitary Standard Material SUS 316...
This brand new IOPAK sanitary centrifugal pump is used mainly in the food and dairy industries to deliver liquid in smaller flow with high pressure and high pressure filtering. Flow Rate: 30,000L/Hr Pump Head: 24m (water used as product) Inlet/Outlet: 51mm NM - 50 Motor: ABB 5.5kW, 3 Phase Food Sanitary Standard Material SUS 316...
This brand new IOPAK 2.5" (63mm) self priming positive displacement pump is made AISI316. Self-priming pumps create and maintain a sufficient vacuum level to draw fluid with no external assistance. As a positive displacement pump, it is able to handle product mixed with air as well as product with a liquid level below the pump. This pump is useful in the milking room as it can suction milk str...
This brand new IOPAK self priming positive displacement pump is made AISI316 and comes with 3" (76mm) inlet and 2.5" (63mm) outlet. Self-priming pumps create and maintain a sufficient vacuum level to draw fluid with no external assistance. As a positive displacement pump, it is able to handle product mixed with air as well as product with a liquid level below the pump. This pump is useful in t...
The GRACO 2.5" Air Operated Diaphragm Pump is much used in the food industry. It is useful for the following functions/foods: Concentrated fruit juice, sauces, pastes, starches, wine, jams, jellies,oils - Evacuation of food from mixing kettles - Transferring from original containers to mixing tanks - High Volume Evacuation of liquid concentrated from holding vessels - Repackaging of fluids fr...
This BRAND NEW rotary lobe 3" (75mm) hot water jacketed pump comes with an ABB motor, water proof control box, white wheel S/S castors, Trolley with handle, BSM connectors, S/S Cover, Mechanical seal. The pump is of excellent quality and very keenly priced.It is frequently used in the confectionery industry. The specification of the pump is as follows: Contact material SUS316 [Lobe Pump] Flo...
Wilden P1 - 13 mm (1/2") Plastic Pump Flow rate to 56.1 LPM (14.8 GPM) (taken from internet - not tested for capacity by PPN) Max Pressure = 8.6 BAR (125 PS NON-WETTED HOUSINGS Description Material Center Section Polypropylene or Acetal Air Valve Polypropylene or Acetal MAXIMUM SUCTION LIFT CAPABILITY 6.1 m (20') MAXIMUM DIAMETER SOLIDS 1.6 mm (1/16") ...
The UERR series dry pumps are based on the durable Roots design principal that offer quiet operation, low vibration and low cost of pump rebuilds. This unit is capable of pulling vacuum to 0.04 Tor Broad product line offers an ideal basic pump configuration for each process and a wide range of pumping speeds. This unit is assembled using two multi stage pumps mounted on a common mild steel frame...
The UERR series dry pumps are based on the durable Roots design principal that offer quiet operation, low vibration and low cost of pump rebuilds. This unit is capable of pulling vacuum to 0.04 Tor Motor size: 2.2kW Inlet and Outlet: One and a half inch. Broad product line offers an ideal basic pump configuration for each process and a wide range of pumping speeds. This unit is assembled usi...
Flow : 10MI/Min Pressure : Less than 10 bar Cable included....
Flow : 10MI/Min Pressure : Less than 10 bar There are 2 in stock at $350 plus GST each....
Max Flow: 4 cbm/hr Max Speed: 1,450 rpm Motor Size: 0.75 kW In/Outlet Size: 1" Starting Torque: 7.3 Nm Reverse Torque: 13.4 Nm Max Differential Pressure: - Close-Coupled: 2.5 bar - Bare Shaft: 4 bar Max Working Temperature: 80 Degrees C ...
Max Flow: 20 cbm/hr Max Speed: 1,450 rpm Motor Size: 3 kW In/Outlet Size: 2" Starting Torque: 24.4 Nm Reverse Torque: 51.6 Nm Max Differential Pressure: - Close-Coupled: 2 bar - Bare Shaft: 2 bar Max Working Temperature: 80 Degrees C ...
Watts: 14000 Refrigerant: R22 F.L.A: 13.4 Volts: 415 Phase: 3 Hertz: 50...
This pump is a sanitary arrangement featuring a quick release clamp to separate the body from the impeller facilitating easy and effective cleaning. Inlet 70mm. Outlet 50mm. Direct coupled to a 22kW motor, 2840RPM, 415V AC, 3 Phase, TEFC Electric Motor. Designed for heavy-duty, high-efficiency applications. Provides exceptional corrosion resistance. Impeller and shaft are one piece, which con...
Good used ALLWEILER Helical Rotor (Progressing Cavity) Pump 70mm (2.75") used in the food industry.
This MOYNO Helical Rotor sanitary stainless steel pump was used in the bakery industry. Features: - Minimal product degradation in shear-sensitive applications - Long service life in abrasive slurries and corrosive fluids - Temperatures to 350° F, viscosities to 1,000,000 cps - Handle suspended solids to 1.1" diameter - Pressures to 225 psi; capacities from .02 to 345 gpm (Product de...
This high pressure pump would be suitable for feeding spray atomisers or similar applications requiring high pressure. This particular unit is 3 Cylinder, combines a 0-60 Bar pressure gauge and a relief valve on the outlet manifold, and features stainless casework....
The most ideal pump for dairy application is the SaniForce 3150 High Sanitation Pump (with Leak Detector and overmoulded EPDM diaphragm. (See SA3AAA.details attached(pdf) EASY TO CLEAN, QUICK KNOCKDOWN DESIGN! * Fluid Contact Areas are FDA -Compliant and meet CFR Title 21 * 3A Certified pump options to meet the sanitation requirements of the milk and dairy industry. * Featuring Graco's durabl...
Brand new GRACO EP2 - Typically used for chemical metering applications SPECIFICATIONS Max Flow: 2.0 l/m (0.5 gal/m) Capacity: 0.015 l/rev (0.004 gal/rev) Max Discharge Pressure: 13.8bar (200 psi) Port Size: 1/2 in Male NPT Motor Consumption: 0.25kW (Low), 0.37kW (Mid) Pump Speed (50Hz): 9 rpm (Low), 29 rpm (Mid) Flow Rate: 0.14 l/min (Low), 0.43 l/min (Mid) Max Suction Lift: 8.9m (29 f...
EP2 - Typically used for chemical metering applications SPECIFICATIONS Max Flow: 7.9 l/m (2.1 gal/m) Capacity: 0.06 l/rev (0.016 gal/rev) Max Discharge Pressure: 13.8 bar (200 psi) Port Size: 1/2 in Male NPT Motor Consumption: 0.25kW (Low), 0.56kW (Mid) Pump Speed (50Hz): 9 rpm (Low), 29 rpm (Mid) Flow Rate: 0.53 l/min (Low), 2.58 l/min (Mid) Max Suction Lift: 8.9m (29 ft) Operation Ma...
EP3 - Typically used for chemical metering or sanitary applications SPECIFICATIONS Max Flow: 23.6 l/m (6.2 gal/m) Capacity: 0.182 l/rev (0.045 gal/rev) Max Discharge Pressure: 13.8 bar (200 psi) Hose Diameter: 19 mm Port Size: 3/4 in Male NPT Motor Consumption: 0.75kW (Low), 1.12kW (Mid) Pump Speed (50Hz): 15 rpm (Low), 42 rpm (Mid) Flow Rate: 2.67 l/min (Low), 7.5 l/min (Mid) Max Suct...
EP4 - Typically used for abrasive material transfer applications SPECIFICATIONS Max Flow: 73.8 l/m (19.5 gal/m) Capacity: 0.568 l/rev (0.15 gal/rev) Max Discharge Pressure: 13.8 bar (200 psi) Hose Diameter: 29 mm Port Size: 1-1/4 in Male NPT Motor Consumption: 1.12kW (Low), 1.5kW (Mid/High) Pump Speed (50Hz): 19 rpm (Low), 43 rpm (Mid), 76 rpm (High) Flow Rate: 10.7 l/min (Low), 24.9 l/...
The design for eliminating edges, corners, concave parts to enhance washing efficiency.The limit number of liquid contact parts enables easy disassembling and reassembling.Capacity Discharge:Up to 177 L/min Pressure:Up to 1.2 MPa Product Uses: Condensed milk, Liquid egg, honey, jelly, jam, cosmetic milky lotion, shampoo, perfume material, etc. Features Easy disassembling/assembling. Minimu...
This STERLING SIHI Liquid Ring Compression Pump was used in a confectionery plant. Motor: 5.5kW, 4 POLE, 3 phase Inlet Outlet Dimensions: 50mm ID...
APV lobe mounted on a stainless steel frame. The frame platform has castors on one end for excellent maneuverability. The pump is powered by a 1.1 kW motor which includes a SEW controller for variable speed adjustment. Pump: Maximum Pressure 100 PSI g Max Speed 960 rpm Model: M0S/008 0 S/N: PP-3580-1099 Connector Size: 50mm Power Supply: Plug type: 3 Phase, 415V, 50Hz, 4Pin Motor ...
This CREPACO R2R skid mounted, variable speed lobe pump is fitted with a jacketed (not steam) feed hopper. The unit can also be used for recirculating a product. Feed Hopper: 490mm (top ID) x 650mm D Hitachi Motor: 0.4kW Comes complete with a control panel Mobile - skid mounted...
This CREPACO R2R variable speed lobe pump is fitted with a jacketed (not steam) feed hopper. The unit can also be used for recirculating a product. Feed Hopper: 490mm (top ID) x 650mm D Hitachi Motor: 0.4kW Controlled by Foot Switch Pipes: one and a quarter inches. ...
Year of manufacture 2005 Drive: 0.55Kw Geared Motor....
This 50mm inlet Helical Rotor sanitary stainless steel pump was used in the food industry.Outlet reduced to 20mm. Fitted with 2 butterfly valves plus a pressure guage Features: - Minimal product degradation in shear-sensitive applications - Long service life in abrasive slurries and corrosive fluids ...
This s/s NETZSCH NEMO NM Series Pumps are designed specifically for difficult pumping situations.THIS IS A MINI DOSING SERIES fitted with an ALFA LAVAL Actuator LENZE Motor: 0.37kW Motor 1410L/min @ 50 Hz 0.45kW Motor 1710L/min @ 60Hz 0.66kW Motor 2520L/min @ 87Hz You can be assured of the following: • Low shear rate • Non-pulsating metered flow • Volume practically unaffected by ...
This s/s NETZSCH NEMO NM Series Pumps are designed specifically for difficult pumping situations.THIS IS A MINI DOSING SERIES fitted with an ALFA LAVAL Actuator LENZE Motor: 0.37kW Motor 1410L/min @ 50 Hz 0.45kW Motor 1710L/min @ 60Hz 0.66kW Motor 2520L/min @ 87Hz You can be assured of the following: • Low shear rate • Non-pulsating metered flow • Volume practically unaffected by ...
This progressive cavity pump is fitted with a Bonfiglioli Variable speed manual variator Applications - Wine, Beer, Carbonated Drinks, Fruit Juices,Purees, Concentrates Dairy products - Milk, Cream,Yoghurt Sauces & preserves - Honey,Jam,Mayonnaise Confectionery - Fondant,Chocolate Fats & oils - Cod liver oil, Corn oil, Vegetable oil, Olive oil Details of Progressive Cavity Pump: Inl...
Applications - Wine, Beer, Carbonated Drinks, Fruit Juices,Purees, Concentrates Dairy products - Milk, Cream, Yoghurt Sauces & preserves - Honey, Jam, Mayonnaise Confectionery - Fondant, Chocolate Fats & oils - Cod liver oil, Corn oil, Vegetable oil, Olive oil How it operates: As the single helix rotor revolves eccentrically within the double helix of the stator, a continuous cavity i...
Stainless Steel frame (only) for Graco Pumps Previously used for H07C series pump. Base: 975 x 1070 mm...
Model 060U2 Waukesha pump specifications: Displacement – 0.153 GPR (0.579 LPR) Nominal capacity to 90 GPM (20.4 m3/hr) Port size – 2.5” (3” Optional) Max pressure – up to 300 PSI (20.7 Bar) Maximum RPM – 600 Temperature range - -40 deg. C to 149 deg.C Features of Universal 2 series pumps are listed below. - 316 stainless steel pump body and cover; - Exclusive, non-galling Waukesha “88” al...
High strength 17-4 PH shafts and hex cover nuts for higher pressure applications. The lobes have been inspected and are in very good condition. Stainless steel gear case Stainless steel bearing retainers Bearing isolators protect bearings from contamination Body retaining screws Steel-It paint Single wing rotors for reduced damage of particulates Jacketed or vented covers Rectangular ...
This simple pump features a 172mm dia x 30mm deep pumping chamber with a quick removable outer face to facilitate ease of cleaning. All wetted parts are stainless steel and the unit is mounted on a Mild and Stainless steel base supported on castors....
Specifications: - Flow rates up to 4.0 gpm (15.1 lpm) - Maximum fluid pressure of 650 psi (44.8 bar; 4.5 MPa) Applications Cosmetics, fruit juice concentrates, creamy candy fillings, ice cream variegates, jams and jellies...
This complete skid mounted pump system was used in a food plant on a very viscous, type of product similar to bean paste or jam. It consists of the GRACO pump, hopper with auger type agitator, self heated tank. ALL CONTACT PARTS ARE STAINLESS STEEL. The jacketed hopper is fitted with a NISSEI 0.20kW motor with a ratio of 1:60 which drives an auger. The auger has a very large single flight which g...
L Series Compact Liquid Ring Pumps for Heavy Duty Extreme conditions, which prevail in humid and wet processes, lead to lime scale or abrasion, and hence to a considerable reduction in the performance of the pump. Elmo Rietschle liquid ring pumps, however, meet these challenges Advantages at a glance •Constant operating characteristics by ceramic coating •Maximum abrasion resistance •...