Tanks For Sale in Australia

IOPAK NEW 1,000L Holding Tank (conical bottom, lids & 2" butterfly valve) Cleanskin1000

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with half moon lids. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fu

Holding Tank

IOPAK NEW 250L Holding Tank (conical bottom, lid & 2" butterfly valve) Cleanskin250

This brand-new stainless steel IOPAK "cleanskin" holding tank can be used for many purposes. It can be used to store a product as it is, as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall-mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side, allows you to clamp on an agitator and mix your product with no fuss

IOPAK NEW 250L Holding Tank (conical bottom, lid & 2" butterfly valve) Cleanskin250

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Standard M

Stainless Steel Oil Storage Tank

Stainless steel tank on tripod stand. Unit fits on a standard pallet Inlet: 400mm ID, 1550mm off ground Tank: 800mm ID, 1000mm deep Volume: 500L Dual manual ball valves: 32mm ID, 190/260mm off ground

Stainless Steel Oil Storage Tank

Stainless steel tank on tripod stand. Unit fits on a standard pallet Inlet: 400mm ID, 1550mm off ground Tank: 800mm ID, 1000mm deep Volume: 500L Dual manual ball valves: 32mm ID, 190/260mm off ground

Stainless Steel Oil Storage Tank

Stainless steel tank on tripod stand. Unit fits on a standard pallet Inlet: 400mm ID, 1550mm off ground Tank: 800mm ID, 1000mm deep Volume: 500L Dual manual ball valves: 32mm ID, 190/260mm off ground

Stainless Steel Mixing Tank

Stainless steel mixing tank on mobile platform with lockable castors. Individual motor control and E-stop on both mixers. It includes pneumatic bearings. Electric: 3~, 415V, 50Hz Auger tip on both mixers: 150mm long Platform size: 1000mm x 1500mm, 200mm off ground Tanks ID: 455mm Infeed height: 1160mm off the platform Max depth: 950mm Volume: 155L Tanks are emptied via bottom port 25mm ID close t

Stainless Steel Mixing Tank

Stainless steel mixing tank on mobile platform with lockable castors. Individual motor control and E-stop on both mixers. It includes pneumatic bearings. Electric: 3~, 415V, 50Hz Auger tip on both mixers: 150mm long Platform size: 1000mm x 1500mm, 200mm off ground Tanks ID: 455mm Infeed height: 1160mm off the platform Max depth: 950mm Volume: 155L Tanks are emptied via bottom port 25mm ID close t

Oil Storage Tank

Unit to be reconditioned Tank ID: 700mm Tank height: 1165mm Volume: 450L Ball valve: 32 mm off ground

IOPAK NEW 500L Holding Tank (conical bottom, lid & 2" butterfly valve) Cleanskin500

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Standard M

IOPAK NEW 500L Holding Tank (conical bottom, lid & 2" butterfly valve) Cleanskin500

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Standard M

Cooling Tank COOL1000

Electrically Heated Mixing Tank (on Load Cells)

Features: - 3x Mettler Toledo load cells to accurately measure the mixing vessel weight - Temperature of the vessel automatically controlled using a heating coil and thermocouple which extends into the tank - Precise pneumatic control for infeed and discharge - Included control cabinet housing to operate entire assembly - Separate cabinet for all pneumatic solenoids - Can be integrated to e

Lightning Fabrications Reactor

Design temperature: - Shell: 690+FV kPa - Jacket: 1105+FV kPa Design pressure: - Shell: 177 °C - Jacket: 177 °C Test pressure: - Shell: 1035 kPa - Jacket: 1659 kPa

Mixing Tank (Cowles Tooth Mixer) THAW1000

Stainless Steel mixing tank. The hatch is supported by heavy duty pulley wire system for ease of access. The contents of the tank are stirred using a 3 phase motor. The tank is supported on ground via threaded stands. Tank ID: 1300mm Internal volume: 1.13 m3 Working Capacity: 1000L Motor Specs: - Type: MH2-112M4 - 4kW - 1450 rpm - 400V, 8.1A - 50Hz - 3 Phase

Australian Made 100L SUS Mixing Tank MT100

This cylindrical, vertical SUS tank was used to mix ingredients in a food manufacturing plant. Power Supply: 415V, 3Ph, 50Hz Capacity: 100L Outlet: sited horizontally at center of tank base. Gear TYP: TN|F5 Ratio: 30/1 with VSD , E-Stop, Stainless Steel control cabinet , Mixer on / off, Safety (Reset, Inbterlock and mointoring) + $4,500 + GST

Australian Made 200L Stainless Steel Mixing Tank MS-200

This 304 Stainless Steel, 200 L, single skin tank, is fitted with a side mounted stirrer, which has 3 blades at the bottom of the shaft, reaching near to the bottom of the tank. It was previously used in a bakery in Australia. The tank has 4 legs, which are mounted on load cells, with a waterproof control panel, mounted within a steel cabinet. There is a central bottom discharge as well a

Australian Made 2 x Tanks, Agitators + Header Tank TTM+H

These twin jacketed premix tanks have a header tank for ingredient addition.They were used in syrup manufacture in a confectionery plant. All are mounted onto a s/s frame.The lower twin tanks are fitted with scraper agitators, heat probes and sieves to filter out particles. Header Tank Capacity:250L Header Tank dimensions:830 mm OD x 470mm D Lower Tank dimensions: 580mm OD x 740mm D (conical

Australian Made 2 x Premix Tanks with Agitators TTM

These twin premix tanks were used in syrup manufacture in a confectionery plant. The top tank only is Jacketed They are both mounted onto a s/s frame. Each tank is fitted with scraper agitators, heat probes and sieves to filter out particles. Tank dimensions: 580mm OD x 740mm D (conical outlet) Capacity: Approx 200L each Agitator: Flat bladed impeller. 0.75kW, 50Hz, Ratio: 15:1 *****

IOPAK NEW 250L Holding Tank (conical bottom, lid & 2"" butterfly valve) Cleanskin250

This brand new s/s IOPAK ""cleanskin"" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Standard

IOPAK Single Skin Contra-Rotating Tank Cleanskin1000-CONTRA

- Effective Volume: 1000 Ltr - Total Volume: 1430 Ltr - Material: SUS304 - Material Thickness: 4mm - 80-Degree Conical Base - Upper Reducer: 1.1Kw/49rpm - Lower Reducer: 3Kw/29rpm - 4" Pneumatic Ball Valve, Triclover Fitting - Two (2") x 51mm Diameter Inlets - Comes with 2 Lids, 2 Safety Grids, 4 Legs

IOPAK NEW 2500L Forkliftable Storage Tank (Conical Bottom) TANK 2500

Specifications Total Volume: 2,500 Ltr Material Construction: SUS304 Outlet: 4" Butterfly Valve Included Accessories: - 38mm CIP - 2" Inlet - Manhole Dimensions: 1,556 x 1,556 x 2,954 mm (l x w x h)

IOPAK NEW 1,000L Holding Tank (conical bottom, lids & 2" butterfly valve) Cleanskin1000

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with half moon lids. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fu

IOPAK NEW 500L Holding Tank (conical bottom, lid & 2" butterfly valve) Cleanskin500

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Standard M

IOPAK NEW 250L Holding Tank (conical bottom, lid & 2" butterfly valve) Cleanskin250

This brand new s/s IOPAK "cleanskin" holding tank can be used for many purposes! It can be used to simply store a product as it is fitted with a lid. Add castors and it becomes a mobile container - or push it under a wall- mounted agitator and it becomes a mixing tank. The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Standard M

IOPAK 10,000L Storage Tank with Stirrer TANK 10000

Specifications: Tank Diameter: 2,300 mm Tank Depth: 2,500 mm Overall Height: 3,000 mm Outlet Height from Floor: 250 mm Manhole Diameter: 600 mm Product In/Outlet Diameter: 50 mm (2 inch) CIP Diameter 38mm 304 stainless steel Not Jacketed Electrical: 3 Phase, 415 Volts, 3Kw, 49RPM These are made new to order, with an approx. 3 months lead time.

Carton Sealing Machines / Case Sealers

Belt Conveyors

Steam Jacketed Kettles

Tanks

Processing Machinery

Packaging Machinery

Materials Handling

ISO 9001 Certified Company

Websites

Process Plant Network Pty Ltd

Email

Telephone

Showroom

Carton Sealing Machines / Case Sealers

Belt Conveyors

Steam Jacketed Kettles

Iopak carton sealing machines

Tanks

Processing Machinery

Packaging Machinery

Materials Handling

ISO 9001 Certified Company

Websites

Process Plant Network Pty Ltd

Email

Telephone

Showroom