New and used food processing, packaging & materials handling machinery
+61 3 9791 7011
<Specifications> Motor Size: 1.1kW (103rpm) based on 20,000 cps, 600l/hr @ 1bar Supplied with 2" bsm connections, epdm stator, c/sic/epdm seals coupled to a 1.1kw geared motor with rpm to suit the duty required set on a stainless steel base plate.
Max Flow: 20 cbm/hr Max Speed: 1,450 rpm Motor Size: 3 kW In/Outlet Size: 2" Starting Torque: 24.4 Nm Reverse Torque: 51.6 Nm Max Differential Pressure: - Close-Coupled: 2 bar - Bare Shaft: 2 bar Max Working Temperature: 80 Degrees C
Max Flow: 4 cbm/hr Max Speed: 1,450 rpm Motor Size: 0.75 kW In/Outlet Size: 1" Starting Torque: 7.3 Nm Reverse Torque: 13.4 Nm Max Differential Pressure: - Close-Coupled: 2.5 bar - Bare Shaft: 4 bar Max Working Temperature: 80 Degrees C
<Specifications> 50L Heavy Duty Receival Hopper S/S Removable Splashguard for Hopper S/S Cover for Motor Supporting Beams on the Trolley (those that run diagonally) VSD and Electrical Wiring Wash-Down Rated (IP65) Control Box On Trolley and Wheels Height from Ground to Top of Hopper: 750mm
<Specifications> Max Working Fluid Pressure: 430psi (3MPa, 30bar) Compressed Air Requirement: 80-100 psi (0.55-0.7MPa, 5.5-7bar) Max Inlet Air Pressure: 100psi (0.7MPa, 7bar) Air Inlet Size: 3/4 in npt (f) Fluid Displacement (Each Pump): 0.23 gal/cycle Max Flow @ 60 cpm*: 28 gpm (106 lpm) Pumps: 2 x FT 14 Pressure Ratio: 4.3:1 Air Consumption @ 70 psi (Each Pump): ~1.8 scfm/gpm (0.48MPa,
<Specifications> Displacement: 0.45 Ltr/rotation In/Outlet Size: 3" Speed Range: 50 - 600 r/min Flow Rate Range: 1,350 - 16,200 Ltr/hr Power Consumption: 4kW (5 HP) Included Accessories: - VSD & Filter - S/S Control Box
TECHNICAL SPECS: Diaphragms: PTFE Maximum fluid working pressure: 120 psi (8.0 bar, 0.8 MPa) Maximum flow rate : 41 gpm (159 L/m) Max Pumpable Solids: 3.2mm (1/8") **** Actual pump performance may be affected by prolonged usage at temperature Refer to the attached brochure for more details. Part No.: FD1111
This brand new IOPAK sanitary centrifugal pump is used mainly in the food and dairy industries to deliver liquid in smaller flow with high pressure and high pressure filtering. Flow Rate: 30,000L/Hr Pump Head: 24m (water used as product) Inlet/Outlet: 51mm NM - 50 Motor: ABB 5.5kW, 3 Phase Food Sanitary Standard Material SUS 316
<Specifications> Pump Type: Priming Piston Max Fluid Pressure: 600 psi (41 Bar, 4.1 MPa) Max Flow at 60 cpm: 4.0 gpm (15.1 lpm) Viscosity Range: 60,000 - 100,000 cps Max Inlet Air Pressure: 100 psi (7 Bar, 0.7 MPa) Air Inlet Size (Enclosed, Exposed Controls): 1/2 npt(f), 3/4 npt(f) Evacuation Efficiency: 99% Available in Exposed or Enclosed Controls (enclosed slightly extra in price) Price is ba
<Specifications> Pump Type: Priming Piston Max Fluid Pressure: 1,200 psi (83 Bar, 8.3 MPa) Max Flow at 60 cpm: 8.5 gpm (32 lpm) Viscosity Range: 60,000 - 250,000 cps Max Inlet Air Pressure: 100 psi (7 Bar, 0.7 MPa) Air Inlet Size (Enclosed, Exposed Controls): 1/2 npt(f), 3/4 npt(f) Evacuation Efficiency: 99% Available in Exposed or Enclosed Controls! Price is based on part no. SDU.A05AAA1AA0C21
<Specifications> Pump Type: Double Ball Max Fluid Pressure: 400 psi (28 Bar, 2.8 MPa) Max Flow at 60 cpm: 14 gpm (53 lpm) Viscosity Range: 25,000 - 60,000 cps Max Inlet Air Pressure: 80 psi (5.5 Bar, 0.6 MPa) Air Inlet Size (Enclosed, Exposed Controls): 1/2 npt(f), 3/4 npt(f) Evacuation Efficiency: 99% Available in Exposed or Enclosed Controls (enclosed slightly extra in price) Price based on pa
IOPAK 2" JACKETED ROTARY LOBE PUMP is fitted with a HOPPER which is often requested on confectionery, bakery or sauce lines. It can be pushed from either side as it is skid mounted with handles at each end. This BRAND NEW rotary lobe pump comes with an ABB motor. The specification of the pump is as follows: Contact material SUS316 Lobe Pump Flow: 5600 - 11,000 litres / hr. (subject to pro
The most ideal pump for dairy application is the SaniForce 2150 High Sanitation Pump with overmoulded EPDM diaphragm. EASY TO CLEAN, QUICK KNOCKDOWN DESIGN! * Fluid Contact Areas are FDA -Compliant and meet CFR Title 21 * 3A Certified pump options to meet the sanitation requirements of the milk and dairy industry. * Featuring Graco's durable, lube-free, non-sticking air valve Maximum fluid working
EP4 - Typically used for abrasive material transfer applications SPECIFICATIONS Max Flow: 73.8 l/m (19.5 gal/m) Capacity: 0.568 l/rev (0.15 gal/rev) Max Discharge Pressure: 13.8 bar (200 psi) Hose Diameter: 29 mm Port Size: 1-1/4 in Male NPT Motor Consumption: 1.12kW (Low), 1.5kW (Mid/High) Pump Speed (50Hz): 19 rpm (Low), 43 rpm (Mid), 76 rpm (High) Flow Rate: 10.7 l/min (Low), 24.9 l/
EP3 - Typically used for chemical metering or sanitary applications SPECIFICATIONS Max Flow: 23.6 l/m (6.2 gal/m) Capacity: 0.182 l/rev (0.045 gal/rev) Max Discharge Pressure: 13.8 bar (200 psi) Hose Diameter: 19 mm Port Size: 3/4 in Male NPT Motor Consumption: 0.75kW (Low), 1.12kW (Mid) Pump Speed (50Hz): 15 rpm (Low), 42 rpm (Mid) Flow Rate: 2.67 l/min (Low), 7.5 l/min (Mid) Max Suct
EP2 - Typically used for chemical metering applications SPECIFICATIONS Max Flow: 7.9 l/m (2.1 gal/m) Capacity: 0.06 l/rev (0.016 gal/rev) Max Discharge Pressure: 13.8 bar (200 psi) Port Size: 1/2 in Male NPT Motor Consumption: 0.25kW (Low), 0.56kW (Mid) Pump Speed (50Hz): 9 rpm (Low), 29 rpm (Mid) Flow Rate: 0.53 l/min (Low), 2.58 l/min (Mid) Max Suction Lift: 8.9m (29 ft) Operation Ma
Brand new GRACO EP2 - Typically used for chemical metering applications SPECIFICATIONS Max Flow: 2.0 l/m (0.5 gal/m) Capacity: 0.015 l/rev (0.004 gal/rev) Max Discharge Pressure: 13.8bar (200 psi) Port Size: 1/2 in Male NPT Motor Consumption: 0.25kW (Low), 0.37kW (Mid) Pump Speed (50Hz): 9 rpm (Low), 29 rpm (Mid) Flow Rate: 0.14 l/min (Low), 0.43 l/min (Mid) Max Suction Lift: 8.9m (29 f
The GRACO 2.5" Air Operated Diaphragm Pump is much used in the food industry. It is useful for the following functions/foods: Concentrated fruit juice, sauces, pastes, starches, wine, jams, jellies,oils - Evacuation of food from mixing kettles - Transferring from original containers to mixing tanks - High Volume Evacuation of liquid concentrated from holding vessels - Repackaging of fluids from or
The GRACO SaniForce 1590 2" Air Operated Double Diaphragm Pump is much used in the food industry. It is useful for the following functions/foods: Concentrated fruit juice, sauces, pastes, starches, wine,jams, jellies,oils - Evacuation of food from mixing kettles - Transferring from original containers to mixing tanks - High Volume Evacuation of liquid concentrated from holding vessels - Repackagin
TECHNICAL SPECS Maximum fluid working pressure: 120 psi (8.4 bar, 0.8 MPa) Maximum free flow delivery*: 100 gpm (378.5 lpm) Maximum Cycle Rate: 200 cpm Maximum operating temperature***: Geolast - 150°F (65.5°C) Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) air @ 50 cpm: 77 dBa Maximum air consumption: 125 scfm (3.5 m3/min.) Air pressure operating range: 20 to 120 psi (1.4 to 8.4 bar, 0.1
IOPAK 2" ROTARY LOBE PUMP This brand new IOPAK rotary lobe pump, is reliable and very reasonably priced! FEATURES * It designed to handle viscous or sensitive products with large particulates. * The butterfly curve of the rotor, ensures a characteristic smooth low shear pumping action. * This leads to the gentle throughput of delicate and sensitive products, without crushing or breaking t
Flow : 10MI/Min Pressure : Less than 10 bar There are 2 in stock at $350 plus GST each.
This brand new IOPAK self priming positive displacement pump is made AISI316 and comes with 3" (76mm) inlet and 2.5" (63mm) outlet. Self-priming pumps create and maintain a sufficient vacuum level to draw fluid with no external assistance. As a positive displacement pump, it is able to handle product mixed with air as well as product with a liquid level below the pump. This pump is useful in t
This brand new IOPAK 2.5" (63mm) self priming positive displacement pump is made AISI316. Self-priming pumps create and maintain a sufficient vacuum level to draw fluid with no external assistance. As a positive displacement pump, it is able to handle product mixed with air as well as product with a liquid level below the pump. This pump is useful in the milking room as it can suction milk str
This BRAND NEW rotary lobe 3" (75mm) hot water jacketed pump comes with an ABB motor, water proof control box, white wheel S/S castors, Trolley with handle, BSM connectors, S/S Cover, Mechanical seal. The pump is of excellent quality and very keenly priced.It is frequently used in the confectionery industry. The specification of the pump is as follows: Contact material SUS316 [Lobe Pump] Flo
This brand new IOPAK 2" (51mm) self priming positive displacement pump has all contacts fabricated of AISI316 s/s.Self-priming pumps create and maintain a sufficient vacuum level to draw fluid with no external assistance. * As a positive displacement pump, it is able to handle product mixed with air as well as product with a liquid level below the pump. * This pump is useful in the milking
This brand new IOPAK sanitary centrifugal pump is used mainly in the food and dairy industries to deliver liquid in smaller flow with high pressure and high pressure filtering. Flow Rate: 20,000L/Hr Pump Head: 24m (water used as product) Inlet/Outlet: 51mm NM - 50 Motor: ABB 4kW, 3 Phase Food Sanitary Standard Material SUS 316
IOPAK 1" ROTARY LOBE PUMP This brand new IOPAK rotary lobe pump, is reliable and very reasonably priced! FEATURES * It designed to handle viscous or sensitive products with large particulates. * The butterfly curve of the rotor, ensures a characteristic smooth low shear pumping action. * This leads to the gentle throughput of delicate and sensitive products, without crushing or breaking t