New and used food processing, packaging & materials handling machinery
WhatsApp +61 3 9791 7011
23 SEPTEMBER 2020   WE ARE FULLY OPERATIONAL AND OPEN FOR BUSINESS
Get an instant quote
Ask a question about this item

Cleveland Steam Jacketed Mixer Kettle MKDL-60-T

From Cleveland Brochure:

Specifications:
- Console/Leg mounted
- DirectSteam Mixer Kettle with 50 psi Steam Jacket Rating.
- 3 H.P. Hydraulic powered
- Scraper/Agitator and Bridge Lift.
- 0-40 rpm
- Scraper Speed with Variable Scraper to Agitator Ratio from 1-1 to 8-1.
- Stainless Steel enclosed
- Mixer Bridge.
- All Plumbing, Electrical andHydraulics enclosed in Consoles.
- Gallonmarkings, Bayonet Mounted Scraper and Agitator.
- 3" Butterfly Valve.
- Hot and Cold Water Faucet.
- Steam Control Kit.
- Safety Device prevents high speed starts; Mixer stops when bridge is lifted.
- Kettle and all exterior surfaces are Stainless Steel.

Features:
· 3 Horse Power Hydraulic powered Agitator, Scraper and Bridge Lift
· Infinitely Variable Scraper Speed Control from 0 to 40 rpm
· Infinitely Variable Ratio between Scraper and Agitator: Agitator rotates from 0 to 8 times the speed of the Scraper
· Removable (without tools) Nylon Blades scrape the entire jacketed surface
· Safety Device prevents high speed starts
· Mixing stops when bridge is lifted - includes safety cover andscreen
· Agitator and scraper are Bayonet mounted for easy removal
· Factory installed Chrome-Plated Steam Control Kit
· Tilt Mechanism of roller bearings and case hardened self-locking worm and segment gear
· 3" diameter Quick Opening Butterfly Valve
· Hot and Cold Water Faucet
· Condensate Valve with Insulated Handle
· 50 psi Steam Jacket Rating on 40 - 100 gallon models
· All Plumbing, Electrical, Hydraulics enclosed in Stainless SteelConsoles
· Enclosed, 10 Gauge Stainless Steel hydraulically operated MixerBridge
· Kettles and all exterior surface are Stainless Steel
· Large Pouring Lip
· Gallon Markings stamped into Scraper Shaft
· Level adjustable solid feet (for floor bolting)
· Power: 3 phase, 415 V, 10 A, 50 Hz
· Typical approvals include NSF and ASME
 
Model:MKDL-60-T
Size/Capacity:0 - 40 rpm Scraper Speed
225 Litres (60 gallons)
Overall Dimensions:Length: 1570 mm
Width: 980 mm
Height: 1300 mm
Stock Number:COOK21426S
Serial Number:7022-04D-01
Condition:Used
Age:2004

THE PPN ADVANTAGE

Fully serviced

Production ready

Backed by warranty

We supply our used machinery fully serviced, production ready and backed by warranty. This is included in our initial quotation.

Every piece of equipment is put under a demanding inspection before delivery. Our inspection covers mechanical, electrical, pneumatic, and cosmetic checkpoints.
The unit is fully serviced to meet high mechanical, electrical, pneumatic, and cosmetic standards. Missing or damaged components are repaired or replaced.
Used machinery is backed by a standard 3-month warranty.

Terms and Conditions:
  • Warranty includes mechanical and electrical parts, but excludes electronic parts (for example, touch screens, servo drives and PLCs).
Our machinery is delivered compliant with the Australian AS 4024 Safety of Machinery Standards. Our engineering team is experienced in assessing machine safety and bringing machinery in line with AS 4024 by installing guards, ergonomic features and safety features like emergency stop controls.

done Comprehensive safety assessment
done Guards
done Ergonomic features
done Safety features
done Safety risk assessment document
Our machinery is delivered fully compliant with AS/NZS 3000 electrical standards.
Provide your product and our engineers will conduct a free trial run of your product. You can either be present, or we can send you video of the trial.

Terms and Conditions:
  • While this trial run is free of charge, any modifications or change parts are billable.
  • Trial runs must be booked in advance.
You are welcome to trial a machine in your plant for 2 weeks (you will be required to pay for transport of the machine and a refundable holding deposit).

Terms and Conditions:
  • Trial of machinery is subject to Process Plant Network confirming the machine is suitable for your product.
  • Get your product to market with minimal upfront investment.
  • Pay off the machinery with the revenue it generates.
  • Rentals are 100% tax deductible and not listed as an asset on your company’s asset register.
  • Minimise risk. It’s no secret that new product failure rates in the grocery sector are extremely high. With Rent to Buy, companies will not be left with paying off idle machinery assets if a project proves to be unsuccessful.
How it works:
  • Available for single machines or complete turnkey systems
  • Start producing immediately with a small down-payment of 2 months rental
  • 6 to 18 month rental periods available
At the end of the rental period:
  • Buy the machine outright, deducting 50% of the rental you’ve already paid from the price of the machinery; or,
  • Keep renting the machinery; or,
  • Return the machinery with no more to pay.
Free comprehensive summary quote including scale engineering drawing
Factory acceptance testing

See your machinery running your product and/or packaging in our shop before it is delivered to your plant. You can be confident your machinery will be production ready after installation.

Complete line running in our engineering shop

This allows you to see your system running and make those final critical changes that often make all the difference.

We commission your system plug-n-play, production ready

Our engineers are able to design your system to fit the floorplan of your plant, then build, configure and test it in our shop before delivering it plug-n-play on arrival.

Training

Our engineers can train your staff in our shop, or we can arrange on-site commissioning and training (at additional cost).

Engineering and Integration Services
  • Complete turnkey process, packaging and end of line solutions
  • Automation and robotics
  • Robotic pick and place, palletisers and cells
  • PLC programming and motion control
  • Scope development, concept development and proof of concept
  • Project planning and management
  • Full engineering drawings, wiring diagrams and line controls
  • Complete trial runs
  • Factory acceptance testing (FAT)
  • On-site commissioning and training
  • Modification or upgrade of existing line
  • Retrofitting, customisation and custom change parts
  • Configure and set to size
  • Safety wiring and interlocks to Category 4
  • Guarding and ergonomic and safety features
  • Safety risk assessments and documentation
  • Servicing machinery

Rent to Buy

  • Get your product to market with minimal upfront investment.
  • Pay off the machinery with the revenue it generates.
  • Rentals are 100% tax deductible and not listed as an asset on your company’s asset register.
  • Minimise risk. It’s no secret that new product failure rates in the grocery sector are extremely high. With Rent to Buy, companies will not be left with paying off idle machinery assets if a project proves to be unsuccessful.
How it works:
  • Available for single machines or complete turnkey systems
  • Start producing immediately with a small down-payment of 2 months rental
  • 6 to 18 month rental periods available
At the end of the rental period:
  • Buy the machine outright, deducting 50% of the rental you’ve already paid from the price of the machinery; or,
  • Keep renting the machinery; or,
  • Return the machinery with no more to pay.

We provide export crating, container loading and overseas freight services at additional cost.

For loose container load (LCL), we arrange an export crate using treated wood according to the machine size (to protect the machine from damage during transport) and crate the machine at our warehouse.

For full container load (FCL), we bring the empty container, load the equipment, and lash/secure them inside the container at our warehouse. We can then arrange either seafreight or airfreight to the customer's nominated destination sea/airports.

We usually arrange on the CFR (Cost and Freight) basis as per Incoterms.

Marine insurance, applicable local duties/taxes, custom clearance and delivery to customer's site in their destination country are to the customer's account.

We regularly provide this service for customers in New Zealand, the United Kingdom, the USA and Asia.



Join our email list and we'll keep you up to date with our latest machinery acquisitions


You might also be interested in...