|This Coating Drum was used in a Snack facility and is suitable for coating SPICES & FLAVOURING onto snack type products.
The product is fed into the rotating chamber via a 300 mm Wide SUS wire mesh belt. Product infeed speed as well as drum rotation speed are controlled by means of variable speed drives. The amount of flavouring or spices can also be controlled by means of an ENMIN Vibrarory Feeder with controller.
The drum is set at a slight incline to the exit end, and is mounted on lockable castors.
Infeed Height: 900 mm
Discharge above floor 500mm
|Size/Capacity:||Drum Dimensions: 440 mm ID x 1420 mm L|
Backed by warranty
We supply our used machinery fully serviced, production ready and backed by warranty. This is included in our initial quotation.
See your machinery running your product and/or packaging in our shop before it is delivered to your plant. You can be confident your machinery will be production ready after installation.
This allows you to see your system running and make those final critical changes that often make all the difference.
Our engineers are able to design your system to fit the floorplan of your plant, then build, configure and test it in our shop before delivering it plug-n-play on arrival.
Our engineers can train your staff in our shop, or we can arrange on-site commissioning and training (at additional cost).
We provide export crating, container loading and overseas freight services at additional cost.
For loose container load (LCL), we arrange an export crate using treated wood according to the machine size (to protect the machine from damage during transport) and crate the machine at our warehouse.
For full container load (FCL), we bring the empty container, load the equipment, and lash/secure them inside the container at our warehouse. We can then arrange either seafreight or airfreight to the customer's nominated destination sea/airports.
We usually arrange on the CFR (Cost and Freight) basis as per Incoterms.
Marine insurance, applicable local duties/taxes, custom clearance and delivery to customer's site in their destination country are to the customer's account.
We regularly provide this service for customers in New Zealand, the United Kingdom, the USA and Asia.
This heavy duty Z Arm laboratory mixer comes from the confectionery industry where it was used in the R & D section. It has stainless steel (SUS304) contacts ...
This machine has been previously used in the confectionary (chewing gum) industry to cut and wrap foil wraps over small single portions. The roller width ...
This continuous dedusting/separating drum was used in the confectionery industry. The machine consists of a stainless steel rotating mesh cage inside ...
This guillotine was used in a confectionery factory. It accepts pre-slit continuous strips of product and cuts them into pre-determined lengths. The ...