|This line was filling two separate products -Fish Paste on one and Tomato Salsa on the other filler. The glass jars were then white-capped and check-weighed.
Jar Sizes filled: 50 g,125 g, 200 g, 300 g, 375-390 g
The filling temperature was at approx. 95 Degrees Celsius.
The product temperature during pasteurisation: The product entered at around 90 Degrees Celsius and exited at no higher than 50 Degrees Celsius.
The cooling was ambient water through a cooling tunnel of water. The product temperature was no higher than 50 Degress Celsius.
The line consists of a number of machines manufactured by globally respected brands.
- CHESS Platform. Large raised SUS checker-plate.
- Rotary Pack-off Table 1200 mm diameter.
- FOODMACH Twist Rinser
- FOODMACH Conveyoring infeed into fillers
- 2 x PFAUDLER Rotary Volumetric Piston Fillers. Model: RP-14, 14 head w/ Reeves Drive.14 pistons.
Capacity: Speeds up to 126 bpm (each filler) -product dependent ( to be tested on your product for viscosity, size of jar etc.Conditions apply)
Jar Sizes filled: 50 g,125 g, 200 g, 300 g, 375-390g.
All Contact parts stainless steel
-SILGAN SWC 500 RH White Steam Vac Capper. Was running Cap Sizes 40 mm,51 mm, 53 mm, 58 mm, 82 mm.
- SILGAN Magnetic Elevator ME 2
- Spray Washer for any product residue adhering to glass jars
- Air Knife Blower
- Cooling Tunnel: 1800 mm W x 9050 mm L belt
- Cooling Tower
- Ancillary Conveyors etc
|Size/Capacity:||Jar Sizes filled: 50 g,125 g, 200 g, 300 g, 375-390 g
Speeds up to 126 bpm - product dependent ( to be tested on your product for viscosity, size of jar etc.Conditions apply)
Backed by warranty
We supply our used machinery fully serviced, production ready and backed by warranty. This is included in our initial quotation.
See your machinery running your product and/or packaging in our shop before it is delivered to your plant. You can be confident your machinery will be production ready after installation.
This allows you to see your system running and make those final critical changes that often make all the difference.
Our engineers are able to design your system to fit the floorplan of your plant, then build, configure and test it in our shop before delivering it plug-n-play on arrival.
Our engineers can train your staff in our shop, or we can arrange on-site commissioning and training (at additional cost).
We provide export crating, container loading and overseas freight services at additional cost.
For loose container load (LCL), we arrange an export crate using treated wood according to the machine size (to protect the machine from damage during transport) and crate the machine at our warehouse.
For full container load (FCL), we bring the empty container, load the equipment, and lash/secure them inside the container at our warehouse. We can then arrange either seafreight or airfreight to the customer's nominated destination sea/airports.
We usually arrange on the CFR (Cost and Freight) basis as per Incoterms.
Marine insurance, applicable local duties/taxes, custom clearance and delivery to customer's site in their destination country are to the customer's account.
We regularly provide this service for customers in New Zealand, the United Kingdom, the USA and Asia.