|This BRAND NEW IOPAK stainless steel inclined auger is very useful for conveying powders or granules
Capacity 3-5m³/hr. (Product dependent)Hopper Size: 200L
It has a 114mm dia auger with 70mm pitch flights. The infeed hopper has mouth dimensions of 690 x 965mm and is set at 1000mm above floor level.
The discharge height is set at 2,700mm above floor level.
The screw is driven by a 415V AC, Three Phase, 1,400mm (Input) TEFC, 1.5kW Gear Motor which is directly coupled to the screw.
A 0.35KW eccentric vibrator is fitted to the hopper wall to assist feed.
Construction is of Stainless Steel and the unit is mounted on wheels and lockable castors.
Unit comes complete with control panel which includes both manual and automatic selection.
* Recommended Oil: TORA 220 or equivalent (if the gearbox is 7 years old or more, TORA 320 or equivalent).
|Size/Capacity:||Capacity 3 - 5m³ /h. (Product dependent)Hopper Size: 200L
Discharge Height: 2,700mm
This is a brand new conveyor fitted with a variable speed controller, and can be supplied wired or unwired. Modular system EM - light products EM is a ...
This is a brand new IOPAK expandable roller conveyor - fantastic value for your hard earned money! Width: 460mm W Closed = 1 524 millimeter (5 ft ) Expanded ...
This trough type V conveyor consists of two PVC conveyors placed at 90 degrees to each other. Best Dimensions: 55mmW x 950mm L (x 2) Motors: PANASONIC ...
This AKURA PVC Belt Conveyor was used in a food plant. Dimensions: 4,000 x 200 x 870mm (l x w x h) Frame: Aluminium Complete with variable speed drive ...