STF Filtros Water Filter - automated screen cleaning FMA-2010
FMA-2010 water filter with automated screen cleaning and a capacity of 45,000 litres per hour at 10 microns.
2 - 10 Bar Working Pressure
50 Degrees C Fluid Max Temp
In/Outlet Diameter: DN-250 (10")
More details are available in the attachments.
- Water gets into the filter through the pre-filtration chamber, where thick particles are
retained, as it was a strainer.
- Water gets into the filtering chamber, goes through from inside to outside the FILTERING SCREEN, producing the SURFACE MECHANIC. High quality water is obtained according to the filtration degree chosen for the filtration screen which can vary from 10 microns to 2000 microns (discuss the screen size you require with the supplier/manufacturer).
- Dust remains on the thin screen interior what produces head loss between the filter inlet and outlet gradually. Two analogic transducers will indicate the backwashing sequence when the DP becomes 0.3 (3 m.c.a). There are other possibilities to make the filter backwashing: Time backwashings, time and pressure combination, continuous backwashing option.
- When the pressure switch indicates 0.3 bar, the drain valve receive the opening order, then it generates a pressure difference between outside (atmospheric pressure) and the inside of the filter (working pressure) that is why fast running water which is produced, goes through the screen and then goes outside through the nozzles internal orifice.
Besides this, at this very moment the starting order is also sent to the engine.
- The result of these actions is: the suction effect of the nozzles on the screen dust and the suction scanner spiral movement in the inside of the filter.
- During the backwashing process that lasts 25 seconds, water is still being filtered and goes on flowing to the system or application. This fact is due to the filters design allows that the backwashing water consumption is MINIMUM and the working system is CONTINUOUS
How it works is taken from this pdf Series 2000
http://www.stf-filtros.com/phocadownload/2000cpf01230vh.pdf
|
Model
|
FMA-2010
|
|
Size/Capacity
|
45,000L per hour at 10 microns
2 - 10 Bar Working Pressure
50 Degress C Fluid Max Temp
|
|
Stock number
|
FILT19997S
|
|
Serial number
|
16/043
|
|
Condition
|
Used
|
|
Year of manufacture
|
2016
|
Fully serviced
Production ready
Backed by warranty
We supply our used machinery fully serviced, production ready and backed by warranty. This is included in our initial quotation.
check_circle Meticulous 97-point inspection
Every piece of equipment is put under a demanding inspection before delivery. Our inspection covers mechanical, electrical, pneumatic, and cosmetic checkpoints.
check_circle Fully serviced
The unit is fully serviced to meet high mechanical, electrical, pneumatic, and cosmetic standards. Missing or damaged components are repaired or replaced.
check_circle Warranty
Used machinery is backed by a standard 3-month warranty.
Terms and Conditions:
-
Warranty includes mechanical and electrical parts, but excludes electronic parts (for example, touch screens, servo drives and PLCs).
check_circle Australian safety standards compliant
Our machinery is delivered compliant with the Australian AS 4024 Safety of Machinery Standards. Our engineering team is experienced in assessing machine safety and bringing machinery in line with AS 4024 by installing guards, ergonomic features and safety features like emergency stop controls.
done Comprehensive safety assessment
done Guards
done Ergonomic features
done Safety features
done Safety risk assessment document
check_circle Australian electrical standards compliant
Our machinery is delivered fully compliant with AS/NZS 3000 electrical standards.
check_circle Trial run your product in our engineering shop
Provide your product and our engineers will conduct a free trial run of your product. You can either be present, or we can send you video of the trial.
Terms and Conditions:
-
While this trial run is free of charge, any modifications or change parts are billable.
-
Trial runs must be booked in advance.
check_circle Trial a machine for 2 weeks in your plant
You are welcome to trial a machine in your plant for 2 weeks (you will be required to pay for transport of the machine and a refundable holding deposit).
Terms and Conditions:
-
Trial of machinery is subject to Process Plant Network confirming the machine is suitable for your product.
check_circle Free training in our engineering shop
check_circle Rent to buy options
- Get your product to market with minimal upfront investment.
- Pay off the machinery with the revenue it generates.
- Rentals are 100% tax deductible and not listed as an asset on your company’s asset register.
- Minimise risk. It’s no secret that new product failure rates in the grocery sector are extremely high. With Rent to Buy, companies will not be left with paying off idle machinery assets if a project proves to be unsuccessful.
How it works:
- Available for single machines or complete turnkey systems
- Start producing immediately with a small down-payment of 2 months rental
- 6 to 18 month rental periods available
At the end of the rental period:
- Buy the machine outright, deducting 50% of the rental you’ve already paid from the price of the machinery; or,
- Keep renting the machinery; or,
- Return the machinery with no more to pay.
Free comprehensive summary quote including scale engineering drawing
Factory acceptance testing
See your machinery running your product and/or packaging in our shop before it is delivered to your plant. You can be confident your machinery will be production ready after installation.
Complete line running in our engineering shop
This allows you to see your system running and make those final critical changes that often make all the difference.
We commission your system plug-n-play, production ready
Our engineers are able to design your system to fit the floorplan of your plant, then build, configure and test it in our shop before delivering it plug-n-play on arrival.
Training
Our engineers can train your staff in our shop, or we can arrange on-site commissioning and training (at additional cost).
Engineering and Integration Services
-
Complete turnkey process, packaging and end of line solutions
-
Automation and robotics
-
Robotic pick and place, palletisers and cells
-
PLC programming and motion control
-
Scope development, concept development and proof of concept
-
Project planning and management
-
Full engineering drawings, wiring diagrams and line controls
-
Complete trial runs
-
Factory acceptance testing (FAT)
-
On-site commissioning and training
-
Modification or upgrade of existing line
-
Retrofitting, customisation and custom change parts
-
Configure and set to size
-
Safety wiring and interlocks to Category 4
-
Guarding and ergonomic and safety features
-
Safety risk assessments and documentation
-
Servicing machinery
Rent to Buy
- Get your product to market with minimal upfront investment.
- Pay off the machinery with the revenue it generates.
- Rentals are 100% tax deductible and not listed as an asset on your company’s asset register.
- Minimise risk. It’s no secret that new product failure rates in the grocery sector are extremely high. With Rent to Buy, companies will not be left with paying off idle machinery assets if a project proves to be unsuccessful.
How it works:
- Available for single machines or complete turnkey systems
- Start producing immediately with a small down-payment of 2 months rental
- 6 to 18 month rental periods available
At the end of the rental period:
- Buy the machine outright, deducting 50% of the rental you’ve already paid from the price of the machinery; or,
- Keep renting the machinery; or,
- Return the machinery with no more to pay.
We provide export crating, container loading and overseas freight services at additional cost.
For loose container load (LCL), we arrange an export crate using treated wood according to the machine size (to protect the machine from damage during transport) and crate the machine at our warehouse.
For full container load (FCL), we bring the empty container, load the equipment, and lash/secure them inside the container at our warehouse. We can then arrange either seafreight or airfreight to the customer's nominated destination sea/airports.
We usually arrange on the CFR (Cost and Freight) basis as per Incoterms.
Marine insurance, applicable local duties/taxes, custom clearance and delivery to customer's site in their destination country are to the customer's account.
We regularly provide this service for customers in New Zealand, the United Kingdom, the USA and Asia.
