New and used food processing, packaging & materials handling machinery
Sign in
Register
WhatsApp +61 3 9791 7011
Process Plant Network - Food processing & food packaging machinery
23 SEPTEMBER 2020   WE ARE FULLY OPERATIONAL AND OPEN FOR BUSINESS
Get an instant quote
Ask a question about this item

Arenco Sprinter Carton Erector and Closer / Sealer TEXAS M1000 + CALIFORNIA

The ARENCO Texas is a compact box and tray former platform with quick size change for carton and corrugated board.
Box Size (mm)
With standard tools,
Texas M1000, Single head machine
L W H W+H X Y
Max Length: 490 mm
Max Width: 250 mm
Max Height: 150 mm
Max Width + Height:280 mm
X: 660 (see pdf drawing)
Y: 700 (see pdf drawing)
Min Length:90 mm
Min Width: 55 mm
Min Height: 20mm
Max Width + Height:75 mm
X: 120 mm (see pdf drawing)
Y: 95 mm (see pdf drawing)
Pdf attached
ARENCO TEXAS M1000 works in conjunction with THE CALIFORNIA.

The CALIFORNIA is a fully automatic, angle built compact three flap closer working with hot melt glue system. Both carton and corrugated board in a wide range of sizes can be handled. By the use of hand wheels in combination with
meters showing the set size, you can make ready for operation with a new size in only 2-3 minutes. No adjustment or tuning is required after the change of size.
Box Sizes
Max Length:290 mm
Max Width: 185/*200 mm
Max Height: 90/*110 mm

Min Length:*65/80 mm
Min Width: *80/100 mm
Min Height: 20mm
NB * Capacity depends on paper quality and box size
Operating speed: Up to 70 boxes per minute.( Conditions apply)
Pdf attached
Both the TEXAS & CALIFORNIA are fitted with ROBATECH Glueing Technology
An EVOLUTION Inkjet Printer comes with the system
 
Model:TEXAS M1000 + CALIFORNIA
Size/Capacity:Operating speed: Up to 70 boxes per minute.
* Capacity depends on paper quality and box size
Overall Dimensions:Length: 1000 mm
Width: 1290 mm
Height: 2150 mm
Stock Number:PCAR19926S
Serial Number: 66166/ 66167
Condition:Used
Age:2009

THE PPN ADVANTAGE

Fully serviced

Production ready

Backed by warranty

We supply our used machinery fully serviced, production ready and backed by warranty. This is included in our initial quotation.

Every piece of equipment is put under a demanding inspection before delivery. Our inspection covers mechanical, electrical, pneumatic, and cosmetic checkpoints.
The unit is fully serviced to meet high mechanical, electrical, pneumatic, and cosmetic standards. Missing or damaged components are repaired or replaced.
Used machinery is backed by a standard 3-month warranty.

Terms and Conditions:
  • Warranty includes mechanical and electrical parts, but excludes electronic parts (for example, touch screens, servo drives and PLCs).
Our machinery is delivered compliant with the Australian AS 4024 Safety of Machinery Standards. Our engineering team is experienced in assessing machine safety and bringing machinery in line with AS 4024 by installing guards, ergonomic features and safety features like emergency stop controls.

done Comprehensive safety assessment
done Guards
done Ergonomic features
done Safety features
done Safety risk assessment document
Our machinery is delivered fully compliant with AS/NZS 3000 electrical standards.
Provide your product and our engineers will conduct a free trial run of your product. You can either be present, or we can send you video of the trial.

Terms and Conditions:
  • While this trial run is free of charge, any modifications or change parts are billable.
  • Trial runs must be booked in advance.
You are welcome to trial a machine in your plant for 2 weeks (you will be required to pay for transport of the machine and a refundable holding deposit).

Terms and Conditions:
  • Trial of machinery is subject to Process Plant Network confirming the machine is suitable for your product.
  • Get your product to market with minimal upfront investment.
  • Pay off the machinery with the revenue it generates.
  • Rentals are 100% tax deductible and not listed as an asset on your company’s asset register.
  • Minimise risk. It’s no secret that new product failure rates in the grocery sector are extremely high. With Rent to Buy, companies will not be left with paying off idle machinery assets if a project proves to be unsuccessful.
How it works:
  • Available for single machines or complete turnkey systems
  • Start producing immediately with a small down-payment of 2 months rental
  • 6 to 18 month rental periods available
At the end of the rental period:
  • Buy the machine outright, deducting 50% of the rental you’ve already paid from the price of the machinery; or,
  • Keep renting the machinery; or,
  • Return the machinery with no more to pay.
Free comprehensive summary quote including scale engineering drawing
Factory acceptance testing

See your machinery running your product and/or packaging in our shop before it is delivered to your plant. You can be confident your machinery will be production ready after installation.

Complete line running in our engineering shop

This allows you to see your system running and make those final critical changes that often make all the difference.

We commission your system plug-n-play, production ready

Our engineers are able to design your system to fit the floorplan of your plant, then build, configure and test it in our shop before delivering it plug-n-play on arrival.

Training

Our engineers can train your staff in our shop, or we can arrange on-site commissioning and training (at additional cost).

Engineering and Integration Services
  • Complete turnkey process, packaging and end of line solutions
  • Automation and robotics
  • Robotic pick and place, palletisers and cells
  • PLC programming and motion control
  • Scope development, concept development and proof of concept
  • Project planning and management
  • Full engineering drawings, wiring diagrams and line controls
  • Complete trial runs
  • Factory acceptance testing (FAT)
  • On-site commissioning and training
  • Modification or upgrade of existing line
  • Retrofitting, customisation and custom change parts
  • Configure and set to size
  • Safety wiring and interlocks to Category 4
  • Guarding and ergonomic and safety features
  • Safety risk assessments and documentation
  • Servicing machinery

Rent to Buy

  • Get your product to market with minimal upfront investment.
  • Pay off the machinery with the revenue it generates.
  • Rentals are 100% tax deductible and not listed as an asset on your company’s asset register.
  • Minimise risk. It’s no secret that new product failure rates in the grocery sector are extremely high. With Rent to Buy, companies will not be left with paying off idle machinery assets if a project proves to be unsuccessful.
How it works:
  • Available for single machines or complete turnkey systems
  • Start producing immediately with a small down-payment of 2 months rental
  • 6 to 18 month rental periods available
At the end of the rental period:
  • Buy the machine outright, deducting 50% of the rental you’ve already paid from the price of the machinery; or,
  • Keep renting the machinery; or,
  • Return the machinery with no more to pay.

We provide export crating, container loading and overseas freight services at additional cost.

For loose container load (LCL), we arrange an export crate using treated wood according to the machine size (to protect the machine from damage during transport) and crate the machine at our warehouse.

For full container load (FCL), we bring the empty container, load the equipment, and lash/secure them inside the container at our warehouse. We can then arrange either seafreight or airfreight to the customer's nominated destination sea/airports.

We usually arrange on the CFR (Cost and Freight) basis as per Incoterms.

Marine insurance, applicable local duties/taxes, custom clearance and delivery to customer's site in their destination country are to the customer's account.

We regularly provide this service for customers in New Zealand, the United Kingdom, the USA and Asia.



Join our email list and we'll keep you up to date with our latest machinery acquisitions


You might also be interested in...

Card image cap

JAEPACK Automatic Carton Erector

This brand new automatic carton erector has proved reliable, efficient and very well priced. It is a real winner with our sales & technical teams - but ...
Card image cap

IWKA Cartopac Horizontal Cartoning Machine

This machine erects a box, inserts the product and closes it in a tuck motion. Maximum size of carton 82mm W and 170mm L. Year of manufacture 1971
Card image cap

IOPAK Semi Automatic Horizontal Carton Closer Gluer

This brand new IOPAK Semi Automatic Horizontal Carton end flap closer gluer is very competitively priced and an ideal machine for the contract packer. ...
Card image cap

IOPAK Case Erector

- Folds bottom covers of carton - Can be used as platform for packing products Air Pressure: 4kg/cm2 Case Size: L200-600mm, ...
Processing Machinery
Packaging Machinery

Materials Handling
ISO 9001 Certified Company

Websites
Process Plant Network
Iopak Machinery
Iopak Spare Parts
Process Plant Network Pty Ltd

Email
sales@processplant.com

Telephone
+61 3 9791 7011

Fax
+61 3 9793 4087

Showroom
3-5 Capital Drive
Dandenong South
Victoria 3175
AUSTRALIA

Postal Address
PO Box 4097
Dandenong South
Victoria 3164
AUSTRALIA

Terms and Conditions   |   Privacy Policy

© Copyright 2017 Process Plant Network Pty Ltd

Disclamer: All measurements, weights, illustrations and specifications are subject to alteration without notice.