|Beer Brewers - Wine Bottlers - this is great for you!
This In-Line Body & Neck Labeller is fitted with two labelling heads and was used to label 350 ml ROUND bottles similar to beer bottles.It can be adjusted to label larger wine bottles as well.At present t is fitted with a bottle Inverter/Blower prior to being labelled but this is easily removed..
Bottle Speed: 15~ 22 bpm ( nominal figure only as variables apply. Your own bottle should be tested to determine exact capacity)
Applicable Product Diameters: 25 mm Dia ~ 100 mm Dia
Applicable Label Size:
Length 20 mm ~ 290 mm
Width: 20 mm ~ 130 mm
Voltage: 240 V/50Hz
Body label station with step motor and height adjustment. Also drives the 2nd neck labelling station.
- Centrally managed through main control panel
- Equipped for one type of cylindrical bottle and neck label
- Working direction: left - right
It should be noted that the neck of the bottle being used must have a straight taper section so that the neck label can lay flat. Necks with a bulge outward are not good candidates for a neck label since this constitutes a radius in two directions. Applying labels over this produces a consistent wrinkle.
|Size/Capacity:||Bottle Speed:15 ~ 22 bpm ( nominal figure only as variables apply. Your own bottle should be tested to determine exact capacity)
The new IOPAK HP 450 electronic hot printer can be used as part of a production line for batch coding etc. It utilises coloured tape to replace ink roller ...
This COMBINA 01 comes from the cosmetic/toiletry industry where they are held in high repute for reliability. It has the added bonus of a ROTARY PACK-OFF ...
This PREMIER C 100 Series Labeller was used in the meat industry to label and print meat trays. It comes with a tray orientation conveyor. The labeller ...
Specifications: Print Speed: - Intermittent: Up to 600 mm/sec - Continuous: 10 - 600 mm/sec Print Areas: - Intermittent: 32 or 53 mm x 75 mm - Continuous: ...