New and used food processing, packaging & materials handling machinery
+61 3 9791 7011
Stainless steel tank on tripod stand. Unit fits on a standard pallet Inlet: 400mm ID, 1550mm off ground Tank: 800mm ID, 1000mm deep Volume: 500L Dual manual ball valves: 32mm ID, 190/260mm off ground
Stainless steel tank on tripod stand. Unit fits on a standard pallet Inlet: 400mm ID, 1550mm off ground Tank: 800mm ID, 1000mm deep Volume: 500L Dual manual ball valves: 32mm ID, 190/260mm off ground
Stainless steel tank on tripod stand. Unit fits on a standard pallet Inlet: 400mm ID, 1550mm off ground Tank: 800mm ID, 1000mm deep Volume: 500L Dual manual ball valves: 32mm ID, 190/260mm off ground
Stainless steel mixing tank on mobile platform with lockable castors. Individual motor control and E-stop on both mixers. It includes pneumatic bearings. Electric: 3~, 415V, 50Hz Auger tip on both mixers: 150mm long Platform size: 1000mm x 1500mm, 200mm off ground Tanks ID: 455mm Infeed height: 1160mm off the platform Max depth: 950mm Volume: 155L Tanks are emptied via bottom port 25mm ID close t
Stainless steel mixing tank on mobile platform with lockable castors. Individual motor control and E-stop on both mixers. It includes pneumatic bearings. Electric: 3~, 415V, 50Hz Auger tip on both mixers: 150mm long Platform size: 1000mm x 1500mm, 200mm off ground Tanks ID: 455mm Infeed height: 1160mm off the platform Max depth: 950mm Volume: 155L Tanks are emptied via bottom port 25mm ID close t
Unit to be reconditioned Tank ID: 700mm Tank height: 1165mm Volume: 450L Ball valve: 32 mm off ground
Features: - 3x Mettler Toledo load cells to accurately measure the mixing vessel weight - Temperature of the vessel automatically controlled using a heating coil and thermocouple which extends into the tank - Precise pneumatic control for infeed and discharge - Included control cabinet housing to operate entire assembly - Separate cabinet for all pneumatic solenoids - Can be integrated to e
IOPAK ""cleanskin"" mixing tank can be used for many purposes! The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Fitted with: -Half moon lids -Strengthened section for clamp weight -Butterfly valve (2""/ 50mm) - Sturdy legs with braces Standard Material: SUS304 Capacity: 1,000L Physical Dimensions: 1,150mm x 1000mmD (+ 130 degr
IOPAK ""cleanskin"" mixing tank can be used for many purposes! The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Fitted with: -Half moon lids -Strengthened section for clamp weight -Butterfly valve (2""/ 50mm) - Sturdy legs with braces Standard Material: SUS304 Capacity: 1,000L Physical Dimensions: 1,150mm x 1000mmD (+ 130 degr
IOPAK ""cleanskin"" mixing tank can be used for many purposes! The STRENGTHENING SECTION, fitted to one side allows you to clamp on an agitator and mix your product with no fuss. Fitted with: -Half moon lids -Strengthened section for clamp weight -Butterfly valve (2""/ 50mm) - Sturdy legs with braces Standard Material: SUS304 Capacity: 1,000L Physical Dimensions: 1,150mm x 1000mmD (+ 130 degr
Design temperature: - Shell: 690+FV kPa - Jacket: 1105+FV kPa Design pressure: - Shell: 177 °C - Jacket: 177 °C Test pressure: - Shell: 1035 kPa - Jacket: 1659 kPa
Stainless Steel mixing tank. The hatch is supported by heavy duty pulley wire system for ease of access. The contents of the tank are stirred using a 3 phase motor. The tank is supported on ground via threaded stands. Tank ID: 1300mm Internal volume: 1.13 m3 Working Capacity: 1000L Motor Specs: - Type: MH2-112M4 - 4kW - 1450 rpm - 400V, 8.1A - 50Hz - 3 Phase
This cylindrical, vertical SUS tank was used to mix ingredients in a food manufacturing plant. Power Supply: 415V, 3Ph, 50Hz Capacity: 100L Outlet: sited horizontally at center of tank base. Gear TYP: TN|F5 Ratio: 30/1 with VSD , E-Stop, Stainless Steel control cabinet , Mixer on / off, Safety (Reset, Inbterlock and mointoring) + $4,500 + GST
This 304 Stainless Steel, 200 L, single skin tank, is fitted with a side mounted stirrer, which has 3 blades at the bottom of the shaft, reaching near to the bottom of the tank. It was previously used in a bakery in Australia. The tank has 4 legs, which are mounted on load cells, with a waterproof control panel, mounted within a steel cabinet. There is a central bottom discharge as well a
These twin jacketed premix tanks have a header tank for ingredient addition.They were used in syrup manufacture in a confectionery plant. All are mounted onto a s/s frame.The lower twin tanks are fitted with scraper agitators, heat probes and sieves to filter out particles. Header Tank Capacity:250L Header Tank dimensions:830 mm OD x 470mm D Lower Tank dimensions: 580mm OD x 740mm D (conical
These twin premix tanks were used in syrup manufacture in a confectionery plant. The top tank only is Jacketed They are both mounted onto a s/s frame. Each tank is fitted with scraper agitators, heat probes and sieves to filter out particles. Tank dimensions: 580mm OD x 740mm D (conical outlet) Capacity: Approx 200L each Agitator: Flat bladed impeller. 0.75kW, 50Hz, Ratio: 15:1 *****