New and used food processing, packaging & materials handling machinery
      +61 3 9791 7011

IOPAK 14 Head Multihead Weigher with 10.4" Touch Screen

This IOPAK 14 Head Weigher with 10.4" Touch Screen has proved to be reliable and accurate. [Features] - Digital Sensors to enhance speed, precision and anti-jamming capabilities - Frame with IP65 protection - Statistical data can be shown on screen (and via optional printer output) - Flat plate on all product-contact surface, overweight discharge equipment, timing hopper, different direction ...

Ishida 14 Head Weigher

This 14 head weigher Model CCW-M-214W-S/30-PB was used in a snack biscuit plant. Weigh Capacity/Range: Per Single Dump: Up to 500 g (weighing accuracy max - X<0.5g ~1.0g Up to 1000 g (weighing accuracy max - X<1.0g ~2.0g Max Volume for weighing (per single dump) 4.5 Litres Weighing Speed: Max 130 WPM Minimum Graduation: 0.1g 0.2g...

Ishida 4 Lane Checkweigher

No. of Lanes: 4 Weighing Capacity: 200 g Weighing Range: 2 - 200 g Weighing Accuracy: +/- 0.1g Minimum Graduation: 0.05 g Weigh Sensor: Double-Beam Load Cells Weighing Speed: 150 times/min (Per Lane) Product Size Range: 40 - 230 L x 10 - 50 W x 5 - 60 H mm Belt Speed: 5 - 65 m/min Preset: Max 100 Construction: IP30...

Ishida 6 Head Linear Weigh Scales with Feeding Hopper Vibrators and Incline Conveyors (Washdown)

This absolutely pristine fully wash-down HACCP rated ISHIDA 6 Head Weigh scale was used to pack grated cheese.It is suitable for smaller packs. It comes with 2 belt feeders with clip-off belts for rapid sanitizing. A cleated belt elevator is also fully wash down. Infeed Belts are particularly suited to more difficult particulates and the s/s weigh head buckets are knurled.Each of the 6 weigh ...

Anritsu Checkweigher

This good used ANRITSU KW587A checkweigher was used in a food factory. 400 g (min) - 25 kg (max) (Tested to 27 kg) d= 4 g Accurate to within 1g for 1 kg weight. Speed: 35 pieces/min (product and size dependent) Temp: 0 - 40 C Belt: 300 mm W x 640 mm L ...

Anritsu Checkweigher

Weigh Range: 2 - 600 g Max Capacity: 400 pcs/min d: 0.02gTemp: 0 deg C - 40 deg C Air reject mechanism. No electronic recording or printing....

Anritsu Checkweigher

Weigh Range: 2 - 600 g Max Capacity: 400 pcs/min d: 0.02gTemp: 0 deg C - 40 deg C...

Ishida Checkweigher with Flipper Arm Reject

Max Weight: 1.2 Kg Weigh Bridge: 320 L x 200 W mm Painted Frame Complete with Reject...

Loma Checkweigher/Metal Detector Combination Unit

This LOMA 7000 Combination Metal Detector/Checkweigher unit was used in the food industry. 1.0 fe, 1.2 nfe, 1.55 s/s (dry product) Overall Aperture: 80 (75mm H) x 350mm W Aperture Height above belt and Belt Width: 50mm H x 250mm W Single Phase, 10 Amp, 50Hz Touch screen panel control Conveyor Belt: 145mm W x1660mm L Pneumatic pusher/rejector /Belt Stop ...

Anritsu Checkweigher/Metal Detector Combination Unit

Specifications Weigh Range: 10 - 3,000 gms d: 0.2 gms Speed: Max 320 pcs/min (Product Dependent) Product Dimensions: 20-250 W x 65-230 L x 5-180 H mm Belt Speed: 15 - 94 m/min Sensitivity: 0.6mm Fe, 1.1mm SUS304 The max product dimensions for the checkweigher is 270 x 245mm The max product dimensions for the metal detector is 500 x 245mm The machine dimensions are 1500 x 700 x 1,600...

Ishida Checkweigher/Metal Detector Combination Unit

Aperture Size: 75 H mm x 150 W Weight: 300g Span Adjustment Weight: 300g Minimum Weight Display: 0.1g The machine has double air rejects included....

Anritsu Checkweigher/Metal Detector Combination Unit

Capacity: 10 - 1,200 g d: 0.1g Speed: Max 220 pcs/min Temp: 0 deg C - 40 deg C 50-60hZ Indicator: D3 300 1 CW Serial K070 600...

Anritsu Checkweigher/Metal Detector Combination Unit with Reject

Capacity: 12 - 3,000 g d: 0.2 g Speed: Max 320 pieces/min Temp: 0 to 40 Degrees C Data Printer KW2002AW Aperture Size: 125 mm H x 295 mm W Usable Size: 120 mm H x 250 mm W Belt Width: 250 mm x 850 mm L Swing-arm reject ...

Anritsu Checkweigher/Metal Detector Combo Unit for Bottles

Checkweigher 10 - 600 g d: 0.1 g Max 250 pieces/min...

Anritsu Checkweigher/Metal Detector Combo Unit with Drop Down Reject

Checkweigher 10 - 600 g d: 0.1 g Max 350 pieces/min...

Anritsu Checkweigher/Metal Detector Combo Unit with Twin Arm Reject

Details on Metal Detector to follow Checkweigher: Capacity: 50g ~ 3000g Speed: Max 220 pieces/min Temp: 0 deg C ~ 40 deg C Electrics: : 50 - 60 hZ ...

Ishida In Line Multihead (14) Weigher with stand

This used high-speed ISHIDA LCW-110 In Line Multihead ( 7 head) Weigher was used on nuts etc. It is used for a wide range of products, including tea leaves, spices, soup ingredients, granular chocolates, vegetable seeds, dehydrated vegetables, dried herbs,nuts and pharmaceuticals. This unit was originally used over a Doy Pouch machine. Head no 2 was weighing 130g Head No 6 was weighing ...

Ishida Linear Weigh Scale (6 head)

ISHIDA Linear Weigh Scale: CCW-Z-106P -S/05-PB 8 head Linear weigher (pair type weigh hopper = 16 head) Weighing Capacity- 500cc Weighing Range - 4g - 500g Accuracy to single product- x= 0.5g to 1.0g (max) Maximum Weigh Volume- 800cc (per single dump) Weighing Speed - Up to 70 wpm (product dependent) Controller- 16 bit microprocessor Weigh Cell- Double-beam strain gauge load cell ...

Ishida Linear Weigher

ISHIDA Linear Weigher Model: CCW-Z-106P-S/05-WP This waterproof linear weigher was weighing smaller low volume items. Weighing Capacity: Weigh Range: 4cc - 500cc Accuracy for Single Product: x=0.5g:1.0g (max) Weighing Speed: Up to 70 wpm (product dependent). Maximum Volume of Weighing: 800cc (per single dump) - Dustproof - Waterproof - Plasma Screen - Stepping Motor - Two weighs per...

Kajiwara Liquid Metering System

This KAJIWARA liquid metering system was used together with a pair of KAJIWARA cookers. but is being sold separately. The unit consits of a 100L hopper/feed tank connected to load cells. The amount of liquid to be used in a system can be pre-set by means of a touch screen...

Ishida Multihead Weigher (20)

This is part of COMP19557S) ISHIDA 20 head Weigher with memory buckets and twin discharge hoppers Model No: CCW-DZ-220B-D/20-PB Weighing Capacity (per single dump: 500g (14g - 500g) 1000g (25g - 1000g) Max Volume for Weighing (per single drop) 3000g Max Weigh Speed: 240 wpm (conditions apply) Year of manufacture 1994 ...

Ishida Multihead Weigher (set up for 4 mixed products) - 16 head

This ISHIDA Multihead Weigher is fitted with 16 heads and was set up to feed and weigh 4 different coloured and flavoured mini chocolate eggs. This model is fitted with 4 product mix infeed weighing system. Weighing Capacity : 1000g Weighing Range (per single dump) 25g - 1000g . Weighing Accuracy: (Max - conditions apply) 500g = X < 0.5g ~ 1.0g. 1000g = X < 0.1g ~ 2.0g. Max Volume for Wei...

Elpack Multihead Weigher(10 head) (Part of COMP19068S)

This ELPACK Goren GRST-10 Head Multihead Weigher was used with an ELPACK GL-250C VFFS Bagging Machine. Included in the package is the painted platform for the weigher, access stairs for the platform and a painted outfeed conveyor. There are also 5 sets of forming shoulders for the bagging machine. Number of weigh channels: 10 Weigh Range: 1000gr Weighing Accuracy: 0.8gr Weighing Speed: 65/min ...

Ohaus Pallet Scale

Capacity: 300Kg Last Calibration: Mar 2018 Power: 1-Phase, 240V, 50Hz, 10Amp...

Ranger Pallet Scale

Capacity: 300Kg Power: 1-Phase, 240V, 50Hz, 10Amp ...

Ishida Screwfeed Multihead (14) Weigher with Conveyor

This ISHIDA (Model -CCW-R-214WB-S/15-WP-SH) Screwfeed Multihead (14) Weigher is a useful machine for wet foods such as cubed meat, gizzards, livers, wet salads etc. Scraper gate type hoppers made of POM plastic material prevent highly sticky products from getting stuck to the inside of hoppers. More hygienic, less complex. Products entering the machine flow smoothly to the screwfeeders thanks ...

Ishida Screwfeed Multihead (14) Weigher with Conveyor

This ISHIDA (Model -CCW-R-214WB-S/15-WP-SH) Screwfeed Multihead (14) Weigher is a useful machine for wet foods such as cubed meat, gizzards, livers, wet salads etc. Scraper gate type hoppers made of POM plastic material prevent highly sticky products from getting stuck to the inside of hoppers. More hygienic, less complex. Products entering the machine flow smoothly to the screwfeeders thanks ...

Ishida Semiauto Multihead Weigher [14]

This semi- automatic progressive multihead weigher gives you all the functions which you need to weigh difficult to handle products like meat, poultry, marine and agricultural products. It is a fully waterproof construction and can easily be cleaned with running water The unit is multifunctional as it can be used as a stand-alone unit [semi - automatically] or set above a thermoformer or skinp...

Teraoka Small Platform Scale with Indicator

This platform measures 380 mm X 380 mm but has a ridged area sectioning the surface of 330 mm X 330 mm ) It is fitted with a DIGI D180 Indicator...

K-TRON SODER Weigh Belt Feeder

This K-TRON Weigh was used in a confectionery plant. Use weigh belt feeders for gravimetric feeding at higher feed rates or where low headroom is a problem. Especially at high feed rates, a weigh belt feeder offers lower initial cost than a loss-in-weight feeder with equal throughput. Materials Fed: free-flowing pellets, powders, fibers and friable materials. Application The Smart Weigh Belt Fe...