New and used food processing, packaging & materials handling machinery
+61 3 9791 7011
This ribbon blender boasts a full stainless steel construction. Unit is mobile on 150mm castors with levelling feet. Unit comes complete with E-stops and hinged guards with safety interlocks. Pneumatic discharge gate is housed inside a cage as well. Power rating: 3 pH 415V 6.6A, 3.5kW Plug: 3phase, 415V, 20A, 50Hz, 5 pin plug Infeed height: 1530mm Discharge height: 735mm off ground ( housing) ,
This Vacuum Tumbler soaks, salts and tenderizes meat in a short period of time without damaging the material. Applications: - BBQ pork, marinated chicken wings and thighs with bones, such cured meats as ham, sausage, etc - Tenderizing meats for enhancing meat quality - Pickled vegetables Characteristics: - Delicate tumbling so as to minimise damage to products and time-efficient process by use
This machine includes vibratory mesh powder infeed integrated into the lid. There is a LOMA drop through metal detector below the outlet of the blender. There are also hanger hooks for a 500Kg bulk bag. Includes all controls and safety. Discharge: 195mm ID, 1610mm off ground Discharge is controlled by two pneumatic slide gates Power system: 3ph, 415V, 50Hz Product is fed using a vibratory hoppe
Stainless steel mixer and with paddles Inlet size: 2000mm X 1000mm Max depth: 1100mm Vertical: 600mm Volume: 2000L (Working capacity will be lower than this value) Electric 3 pH, 415V, 50Hz Infeed height: 1340mm off ground Discharge height: 245 mm off ground (pipe centre) Discharge ID: 72mm
1,500L Working Capacity, 1,850L Total Capacity. Machine has 2 x ribbon mixers each with it's own motor and gearbox. Each ribbon has a side discharge half moon gate (pneumatically controlled). The machine will be fully refurbished mechanically and will include a brand new control panel with variable speed drive for each ribbon, safety interlocks with double redundancy, mix timer, E-stop, safety res
Features: - Two inverters for independent control of scraper and tools rotation plus inversion of tools’ rotation - Patented Oil Free driving system of the planetary tools rotation - Possibility to intensively mix in pressure for consistent and elevated product aeration. - Efficient scraping of bottom and side of the mixing bowl “with no dead zones” - Fast incorporation and delicate distribution
Gebr. Ruberg Mischtechnik KG Vertical Twin Spiral Batch Mixer Type HM 100. Material of construction is 304 stainless steel (1.4301) on product contact parts. Working capacity: 100 to 150 litre. Inside rated for 1.5 PSI (0.1 bar). Twin shaft spiral mixing blades with a speed of 18-62 RPM by (2) drive motors. Inspection doors with safety devices. Bottom product outlet. Unit is mobile on casto
Model: Ribbon Serial: 1000.31.10 Size: 1000 Material: 316 stainless steel RPM: 36 Power: 7.5kW Electrics: 3phase, 415V DOM: 18/2/2010
Blender with a lock lid and safety interlocks Bidirectional mixing option and limit switch for lifting column Size: 1200 x 450mm Max depth: 570mm Volume: 280L Lifting range: 300mm Discharge port: 150mm ID (with manual gate) Discharge heights: 1100mm & 800mm Lifting motor: SN: RMI110S ratio: 100:1 1.5kW/ 1423rpm
Incline Conveyor - Lateral drive motion using cleated belt - Cleat pitch: 255mm - Cleat height: 90mm - Belt width: 200mm - Lateral length of conveyor: 4200mm C2C - Infeed height: 800mm - Discharge height: 1470mm off ground - Electrics: 3ph, 415V, 50Hz - Dimensions: 1500mm L x 1050mm W x 2850mm H Mixer - Made by Greer Australia Pty Ltd - Machine No: 4555 - DOM: 12-4-1979 - Mixer mounted on caged
This Forberg mixing system mounted on a stainless steel stand, bin lifter and access platform. Forberg mixer: Model: F500 Serial number: 972179 YOM: 1997 The Forberg Twin Shaft Paddle Batch Mixer creates a fluidization zone where the components are efficiently mixed into a precise homogeneous mixture. Each Forberg Mixer is custom engineered to fit the best possible way into a new or existing pro
Heavy duty twin Z-arm mixer previously used to mix cookie dough Stainless steel contact parts Fully compliant with Australian standards Hydraulic tilt Safety interlocks on the mixer lid Forward and reverse operation Painted Exterior ABB Variable Speed Drive Please contact us for onsite trial. Electrics: 3ph, 415V, 50Hz, 5 pin plug Mixing motor size: 11kW (More details in images) Gearbox ratio:
Heated tank with temperature control Tank mounted on mobile frame on wheels Stainless steel contact parts Painted Exterior Stainless steel stirrer Tank ID: 1125mm Tank max depth: 1085mm Tank capacity: Tank height 1900mm Volume: 1.08m3 Tank capacity: 1000L Electrics: 415V, 50hz, 5 pin plug Motor : 0.75kW, 3.34A, 1400 rpm, 415v
TFT-ROTOPLUS RP1000-2000-3000 The TFT-RotoPlus is the worldwide standard in continuous aeration technology. Being present in the market for nearly 30 years the TFT-RotoPlus has proven its reputation over and over in numerous applications. The fact that we still see machines from these early days doing their tasks on a daily base proves the reliability of this machine. The mixing head design is uni
High-speed Mixer Type SM75-200 Wheel in bowls facilitate the handling and tipping. Machine operates automatically. Bowl is lifted by hydraulic lift. Control circuit is operated on 220V
Strong enough for bagels, gentle enough for french dough, Empire Stationary Bowl. Coordinated 2-speed spiral and bowl rotation gives maximum control of ingredient blending, dough development and better end product. Exclusive features, advanced engineering and rugged construction means maximum versatility - precise mixing control and consistency - higher output, faster mixing time - quiet and relia
Stainless steel construction Top mount (fixed) mixing motor 1x impellor and 2x mixing paddle shaft. Safety interlocks on lid and screen Includes Bonfiglioli Vectron VSD Internal Diameter: 800mm Max depth: 600mm Elongated sphere Volume: 260L or 0.2597m3 (approximation) Discharge: 42mm ID, 335mm off ground Mixing motor: Make: Bonfiglioli 3~ Mot M3LA4 230/400V 50Hz 2.2kW 9.3-5.4A 1410 rpm 460V 60
Drum Roll Mixer - mounted on a steel frame is driven by a drive belt. The unit runs on 415V 3 ~ supply. The drive is attached to only one shaft. This unit can accommodate standard drums of 900mm long x 600mm OD Motor: Make: CMG 3~ Star 0.37kW, 415V, 50Hz 1.25 F.L.Amps 935 F.L.rpm Driven pulley: 10 1/4 inch Driving pully 2.5 1/2 inch
Access door has safety interlocks Specifications: Discharge dia: 170mm (1360mm off ground) Infeed mesh size: 50x50mm Infeed dia.: 1480mm Auger length: ~1250mm Documentation attached
INOTEC mixers are individually tailored to the product and power requirements and manufactured for you in a wide variety of shaft configurations: Two height offset mixing shafts with interlocking paddles and a powerful motor. With one outlet flap on the lower mixing pan and optionally a second flap on the upper pan. Round reinforced paddle tips for gentle mixing available as option Two interlo
Height of the mixing tank is controlled by piston and scissor mechanism This unit is sufficient with its own hydraulic system - S/S Construction with frame mounted on 150mm lockable castors - Tank Volume: 200L - Discharge Outlet type: Butterfly - Discharge Outlet ID: 75mm - Line Voltage: 400V,50Hz, 3 ~ - Control Voltage: 230V/AC- 24V/DC Mixing Motor & gearbox with mesh paddle: - SEW
- Complete stainless steel construction - DOL included - Dual wave shafts with scraper - Auger screw to transport mixed material and expel via discharge - S/S mesh cover with switch door protection - Mixing shaft powered by geared chain drive train Internal volume: 300L or 0.3 m<sup>3</sup> Shaft motor: - Model 4016S || E-54078 - 5HP - 3~ - 60Hz -13.8/6.9A - 230V/460V - 1725
The Breddo LDT-Series 1800 RPM Square Tank/Direct Drive Likifier is designed to dissolve solids or semi-solids where time, temperature and complete hydration are important. Originally developed to dissolve natural gums and synthetic thickeners used in the manufacture of frozen desserts, the Likwifier dissolves and disperses virtually any food product more efficiently and completely than other syst
Aerator for marshmallow & biscuit creams. This Haas Mondomix aerator / continuous mixer incorporates air bubbles in the product to give it a light and airy texture. The mousse product can range from light and fluffy to creamy and thick, depending on preparation techniques. The mousse may be sweet or savoury. Dessert mousses are typically made with whipped egg whites or whipped cream, flavoured
This Single Shaft Ribbon Blender/ Mixer comes complete with a 5,5 kW motor and attached electrical control panel. Stainless steel fabrication on hard stands Overall dimensions : 2050mm L x 1200mm W x 2700mm H Electrics: 3ø, 10A, 50Hz, 5 pin plug Motor&Gearbox Type: 132S-4 JB/T8680 5.5kW, 415V, 60hz,10.73A,1750rpm Ribbon OD: 600 mm and 300 mm Ribbon Shaft OD: 80 mm In-feed: -
Drive belt driven cone mixer Includes cabinet with E-stop and start-stop controls S/S frame bolted to the ground Elec: 3~ 415 V, 50Hz Mixer max dia: 1400mm Outfeed dia: 230mm Infeed dia: 400mm Capacity: 1000L Motor: 415V, 3kW, 40A Gearing ratio: 4.64
This Italian single shaft mixer is fitted with fixed gate -type paddles on affixed to each side of the shaft. This unit, one of two, was used as a mixing/holding vessel to keep a liquid from settling. Overall Trough Dimensions: 840 mm L X 600 mm W X 600 mm D Motor: 1.8kW, 1450/960 rpm, 3 phase, 400V Outlet actuated by a pneumatic sliding gate valve. Skid mounted on a s/s base with adjustable
This Italian single shaft mixer is fitted with fixed gate -type paddles on affixed to each side of the shaft. This unit, one of two, was used as a mixing/holding vessel to keep a liquid from settling. It is also fitted with a PISTON PUMP mounted on the same skid. This decanted the mixed product. Overall Trough Dimensions: 840 mm L X 600 mm W X 600 mm D Motor: 1.8kW, 1450/960 rpm, 3 phase,
Unit for PPN internal use only, not for sale .
This s/s Auger inclined mixer/conveyor has facitities for heating or cooling through the central shaft as well as the jacket. Trough Dimensions: 600mm W x 600mm D x 2700mm L Diameter of hollow shaft: 100mm Flight distance: 400mm Incline: 800mm - 1450mm Electrics: 2.20kW, 32rpm. Ratio: 43:26
This small aerator/mixer would be suitable for a laboratory or pilot plant. The mixing head drive is variable speed. The feed pump is also variable speed. Mixing Head Size is 51mm The rotor has 36 pins, the stator has 26 pins. The unit is skid mounted on a stainless steel trolley with the control panel above, mixer/aerator below and the lobe pump beneath. 36 pins on rotor 26 pins on sta
This In-line Liquid Mixer mixes 2 liquids together continuously. Inside the vertical pipe is a motor drive mixing head with a variable speed drive. Great for mixing syrups into yoghurt. Fruit pieces into liquid combining 2 liquids together etc. Very easy to clean.