New and used food processing, packaging & materials handling machinery
      +61 3 9791 7011

SEIKENSHA Continuous Cooker/Extractor

This system mixes and cooks by utilising a stainless steel screw driving through a steam jacketed S/S barrel. Solids enter the system via an overhead mounted feed hopper via an adjustable feed rate "gate" valve. A facility exists for a liquid addition to the screw barrel, immediately following the solids entry point. The liquid feed is via an on board S/S 1/2" pump and 1/2" thick wall tubing....

IOPAK Cream Chiller

Capacity 1,000L/Hr Tank Capacity: 300L Product Contact: SUS316 (SUS304 for Non-Contact) Cream Inlet Temperature 36 C Flow Temperature 36C- 4 C It is equipped with 1.5" Rotary Lobe Pump (1,000L/hr) - This cream cooler will be supplied to Australian Standards. It will be skid mounted. Quote is subject to confirmation of project scope. ...

JOHNSON Horizontal scraped surface heat exchanger

The unit was previously used for texturisation of chocolate paste. Name Plate Details - JACKET SIDE Design Press (N/mm) 1.379² Hydraulic Test Press (N/mm) 2.07² Design Temp (Deg C) 195 Cap (Litres) 11.51 Medium Water PRODUCT SIDE Design Press (N/mm) 3.45² Hy...

Alfa Laval Hot Water Make up Set

Gasketed plate-and-frame heat exchangers provide efficient heat transfer in compact equipment with a small footprint. The units have a flexible design and are easy to service and maintain. Plate Heat Exchangers are used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like...

JOHNSON VOTATOR Laboratory Scraped Surface Heat Exchanger

This laboratory/pilot scale scraped surface heat exchanger, or continuous cooker, was used in the confectionery industry....

PAVAN Shell and Tube Heat Exchanger fitted with centrifugal pump

This shell and tube heat exchanger was used in a pasta plant.It comes fitted with its own centrifugal pump. No name on pump Motor size of pump: 2.2kW 2855 rpm Grade of s/s: 304 /304L Tube Length: 1500mm 6 Tubes within. OD of Shell tube: 300mm Stamp on Pump Inlet Flange WA 052268 BE 967 Stamp on flange leading to HE from Pump 65DN -10 16 Tube1092 F 304/304L Stamp on outlet flange of ...

Australian Made Stainless Steel Heat Exchanger

This unit consists of 10 spiral formed 25mm dia stainless steel tubes of 3,000mm length set in a flat rack configuration. Centre distance between the tubes is 85mm and the entry and exit ports are 1.5" female dairy. The unit would be suitable for ambient air interchange or as liquid submersed type heat exchanger....

JOHNSON Votator - Swept Surface Heat Exchanger

Footprint - Width 560mm : Depth 730mm Height - 1400mm Unit is mounted on castors to facilitate portability. Product outlet - 1.5" dia Product inlet - 1.25" dia Refrigerant outlet - 1.25" dia Refrigerant inlet - 1.5" dia....