|
|
|
| DETAILS OF MACHINERY |
This unit consists of two separate elevators within the one housing. The primary feed hopper is divided into two sides - 590 x750mm hopper mouth opening to the 100mm belt elevator, and 720 x 750mm hopper mouth opening to the 200mm belt elevator. Both belts are fitted with cleats set at 315mm pitch.
The infeed hopper opening is set at 1200mm above floor height whilst the discharge is 2002mm.
Construction is fully stainless steel, and a 415V, 3 Phase, 1370RPM, 0.37KW, TEFC Electric motor is chain coupled to a gear reduction which drives to a common header drum for both belts. | | | | Size/Capacity: | 100mm & 200mm Wide Belts | | Stock Number: | MATH6949N | | Serial Number: | MATH6949S | | Condition: | Used |
|
|
|
|
