|This jacketed and electrically heated ketle was used in a confectionery plant.It is mounted on its own s/s forkliftable skid.
Whilst the unit was obviously stirred, the actual arm is missing but the motor and drive are in place.
ID: 715mm x 550mm D
OD: 862mm X 720mm
BALDOR geared motor: 0.75kW, 35rpm
The Product is decanted through a 50mm port and manually controlled by means of a KEYSTONE valve.
The Kettle is closed by means of two hinged half-moon lids. A control panel fitted with a digital temperature controller, stop/stat buttons for the stirrer and the on/off switch for the heater.
This heavy duty Z Arm laboratory mixer comes from the confectionery industry where it was used in the R & D section. It has stainless steel (SUS304) contacts ...
This machine has been previously used in the confectionary (chewing gum) industry to cut and wrap foil wraps over small single portions. The roller width ...
This continuous dedusting/separating drum was used in the confectionery industry. The machine consists of a stainless steel rotating mesh cage inside ...
This guillotine was used in a confectionery factory. It accepts pre-slit continuous strips of product and cuts them into pre-determined lengths. The ...