New and used food processing, packaging & materials handling machinery
      +61 3 9791 7011
GENERAL MILLS RELOCATION SALE
Save BIG on processing, packaging, materials handling & more! Hundreds of items will sell by the end of August.
View the list of equipment for sale     Call +61 3 9791 7011 to arrange an inspection.
Get an instant quote
Ask a question about this item

ABM Metal Detectors VF-100 Metal Detector (Drop-Through) with 4 mtrs cable remote

PROUDLY AUSTRALIAN MADE!
This vertical fall or drop through metal detector is commonly used on Form Fill and Seal machines, mounted just above the forming tube, or in other applications for gravity fed free flowing powders, pipeline, liquid or granular materials.

These drop-through metal detectors are suitable for dry products, and not intended for fresh products and wet environment.

SPECIFICATIONS :
Detector Head weight: 100mm unit is15kg
Detection Sensitivity at Phase Out: 100mm unit:0.7mm mild steel & 1.2mm Stainless steel
Metal Free Zones: 100mm: 40mm each side for moving metal
Aluminium Head Construction: Coating is of Food Grade Epoxy White
Rating: IP65

BENEFITS
Offering major benefits in performance, the VF range of drop through or gravity fed metal detectors are ideal wherever common packaging materials such as aluminium foil, metalized film are used or, simply where space is a major factor.

Vertical packaging lines present challenges to metal detector manufacturers or suppliers, in the form of limited installation space, proximity of metal support structures, moving weigh hoppers or discharge chutes etc, including a degree of engineering problems that commonly exist in the installation. This is where the VF units have the advantage of ignoring most of these problems.

Drop-through metal detectors are commonly used on Form Fill & Seal machines and mounted just above the forming tube, or other applications for gravity fed, free flowing powders, pipeline, liquid or granular materials.

For pipeline applications, these units can be mounted in any position with the ability to
operate with hot or cold products travelling at high speeds.

The VF metal detectors greatly benefit from its unique RF Electromagnetic field suppression system, that enables the units to perform highly in the most restricted of spaces, whilst operating in close proximity to fixed or moving metal structures.

The VF range of detectors have an extremely low metal free zone of approximately 40mm each side of the detector coils, and as a standard, they are fitted with remote mounted controls up to 10 meters away for ease of operation.
 
Model:VF-100
Size/Capacity:Detector Head weight: 100mm unit is 15kg
Detection Sensitivity at Phase Out: 100mm unit:0.7mm mild steel & 1.2mm Stainless steel
Stock Number:METD16371G
Serial Number:G
Condition:Brand New


Join our email list and we'll keep you up to date with our latest machinery acquisitions


You might also be interested in...