|Materials Handling Category
|MATERIALS HANDLING Flat bed Trolley with a S/S Handle (foot brake) |
Mild steel flat tray or bed
Fitted with castors and foot brake system
|ALFAGOMMA Flexible s/s pressure Food Grade Hose|
This food grade industrial UHMWPE Chemical S & D s/s flexible hose was used in a confectionery plant.
Outer diameter of pipe (approx) 100mm
Rating: 16 bar ( 240psi)
Complete with DIXON s/s end clips (Model E 300 - 316)
|KRAUSE PACIFIC Flexible Silo with load cell, screw conveyor, dust extractor etc|
MUST BE SOLD NOW - MAKE AN OFFER! Sugar refiners, dairies, soft drink manufacturers and the food industry - a FLEXIBLE SILO is available now!
Capacity - 40 tonne
- Previously used for manufacturers/bottlers grade sugar
- Includes load cells with supports
- Stainless steel discharge screw conveyor
- Butterfly valve on outlet
- Donaldson DCE insertable bag type dust collector with reverse ...
|KOCKUMS AUTOFLEX Flexible Wall Volumetric Feeder|
This AUTOFLEX Flexible Wall Feeder has been designed to provide controlled product feed of powders, granules and flaked materials.
TiO2, CaCO3, Lime, Talc, Clay, PVC, Stucco,Oxides, Pigments, Saw dust, Plastic granules,
Seeds, Flour, Fertiliser, Sugar, Salt,Seasoning.
Capacity: 1350L/hr (based on details from manufacturer on 57mm helix diameter)
Max. Height: 2,500mm
Max. Lifting Weight: 900kg
Max. Fork Width: 600mm
Fork Length: 900mm each
Inbuilt charger ...
| AUSMADE (Australian Made) Freestanding Hopper (S/S, rectangular) with 45 degree angled discharge chute |
This s/s hopper was used on coffee. It is mounted on a s/s frame with 4 legs. The rectangular hopper has an outlet chute which is angled at 45 degrees.
This hopper would be suitable for products which are fairly free flowing, helping to minimise bridging.
Dimensions of Hopper: 800mm W x 800mm L x 740mm H
Overall Dimensions: 930mm W x 1030mm L x 1940mm H
Height of outlet from ground: 600mm
|IOPAK Inclined Auger Screw Conveyor with Round Hopper|
This BRAND NEW IOPAK stainless steel inclined auger is very useful for conveying powders or granules
Capacity 3-5m³/hr. (Product dependent)Hopper Size: 200L
Discharge Height: 1,900mm
It has a 114mm dia auger with 70mm pitch flights. The infeed hopper has mouth dimensions of 690 x 965mm and is set at 1000mm above floor level.
The discharge height is set at 1900mm above f ...
| AUSMADE (Australian Made) Inclined Conveyor|
This incline elevator is mounted on a mild steel painted frame.
Belt width: 250mm W x 1180mm L X 900mm H
Belt is made of ridged rubber for good traction. ...
|SCHMIDT GmbH Lane Converger|
This unit is intended to re-arrange products from one lane at the inlet, to three lanes at the outlet end of the unit.
A Siemens S7 PLC manages the control functions, and this could easily be re-programmed to offer a wide range of control and counting functions.
The lanes terminate to three 170mm wide belts at 200mm centres at the exit end of the unit. The conveying height above floor level is 6 ...
|ANRITSU Lane Diverger|
This unit is designed to diverge one incoming product stream into two outgoing streams at 600mm centres.
The main conveyor is driven from an electric motor via a mechanical speed variator.
Construction is of stainless steel.
Platen Width: 200 mm
Dimensions: 800 W x 1,050 L mm
Working Height: 730 mm ...