|
|
|
| Confectionary Category |
| |
|
 |  | IOPAK 2,000Ltr Chocolate Tank (S/S)
Brand new IOPAK Chocolate Tank. This one is 2000L but just tell us the size of your preference!
Specifications:
Overall Capacity: 2,390 Ltr
Working Capacity: 2,000 Ltr
Inner Diameter: 1,480 mm
Outer Diameter: 1,500 mm
Internal Depth: 1,290 mm
Overall Height: 2,576 mm
Reducer: 415V, 4kW, 12 rpm/min
Material Constructions: SUS304
Access Manhole: 800mm x 430mm Semi-Circle
Product Disch ... | |  | BLUM + CO Chocolate Enrober
This enrober is designed to process all fluid chocolate & cocoa masses involved in coating of candies and biscuits.
Width of enrober: 800mm
Bottomed chocolate applicator is a feature.
b) The infeed conveyor is included and is 1,000mm x 1013mm. This is in addition to the machine length of 2,000mm.
c) Stringer: Not included.
Mass circulation is effected by means of a heated chocolate pum ... | |  | AR-CAN Chocolate Enrober/Coating Machine
Chocolate Coating Machine (Model: ACCP 1000 Custom):
* Bandwidth is 1050mm.
* Stainless steel wire mesh band is supplied by Maertens Germany.
* All parts of the machine are manufactured from stainless steel.
* The coating machine is equipped with a PLC. You can adjust all settings for the coating machine and cooling tunnel by touchscreen.
* The coating machine synchrones with the entire line. ... | |  | AR-CAN Confectionery Bar Forming Line
Bar Dimensions W x D x H (Center Product)
Mini Bar: 21 x 57 x 12mm Maxi Bar: 24 x 97 x 14mm
Bar Dimensions W x D x H (Chocolate Coated Product)
Mini Bar:25 x 60 x 14mm. Maxi Bar: 28 x 100 x 16mm
1st Layer
Mini Bar:9 mm nougat(0,85 kg/L)
Maxi Bar:11mm nougat (0,85 kg/L)
2nd Layer
Mini Bar:(3mm caramel(1,4 kg/L) Maxi Bar:3mm caramel (1,4 kg/L)
Slab Width
Mini Bar:380mm Maxi Bar ... | |  | A.M.P. ROSE Confectionery Cut & Wrap Machine
This machine has been previously used in the confectionary (chewing gum) industry to cut and wrap foil wraps over small single portions.
The roller width is 38mm and the central aluminium wheels 232mm.
The individual pockets are 18 x 14 x 10 mm (l x w x h) ... | |  | EUROMEC Confectionery Sizer/Sorter (3 lane)
This EUROMEC confectionery sorter can be used for sorting/sizing any small items (under/over size, irregular shapes or 3 different sizes).This machine was sorting hard boiled confectionery
Product is fed into a vibratory hopper. This directs the objects to be sized onto the s/s perforated vibratory table. The first sizing commences when the first items drop through a chute whilst the rest are ... | |  | ORBIS ENGINEERING Cooling Tunnel
This ORBIS ENGINEERING cooling tunnel was used in a confectionery plant.
The product was brought down from warm to approx. 5 degrees C (it is not a multi staged cooling system).
Cooling Section Length (Enclosed) 8500mm (8.5m)
Overall Belt Length: 10,500mm (10.5mm
Belt Width: 400mm
Overall Conveyor Width: 440mm
Tunnel Aperture Height and Width:40mm x 400mm
Height of conveyor: 900mm
Co ... | |  | TOWA Dedusting Drum
This continuous dedusting/separating drum was used in the confectionery industry. The machine consists of a stainless steel rotating mesh cage inside a stainless steel outer casing. Products in a flexible package were tumbled inside the drum. The products were separated and the light packaging was sucked out. The loose products dropped through the mesh screen into a chute. Any extraneous dust was ... | |  | AUSMADE (Australian Made) Guillotine Cutter for Confectionery Bars (Touchscreen)
This guillotine was used in a confectionery factory. It accepts pre-slit continuous strips of product and cuts them into pre-determined lengths.
The infeed and out feed conveyors have individual drives (415V AC, Three Phase, 0.37KW, 18 RPM (Output) RPM, Gearmotors, which incorporate electronic speed controllers. It is intended that the out feed band be run at a faster speed than the infeed to ... | |  | MORIYAMA Gum Mixer/Extruder plus platform (z arm, masticator)
This gum mixing machinery consists of two major elements - A Double Masticating arm mixer, a Twin Screw Extruder as well as the platform on which the mixer stands. All contacts are STAINLESS STEEL and imachinery is in excellent condition and can be viewed working on PPN's floor.
(a) Double "Z" arm mixer: This very heavy duty MORIYAMA Z arm mixer is 180L overall but was mixing 50kg batches of g ... | | |
|
|
|
|
Bank of 3 jacketed tilting cookers
Single head automatic Screw Capper (with cap elevator)
VFFS (Servo Driven)
High Speed Slicer, dicer, strip cutter
Tank (s/s) 200L with lid
Ribbon Blender ( Stainless steel - Painted Outside)
Multihead Weigh Scale (24)