|
|
|
| Pack - Other Category |
| |
|
 |  | FUJI Auto Feeder for Flow Wrapper
The products on the pool conveyor are separated by the linear separator and fed into the infeed chain of wrapper
Operating Speed: 300 r.p.m. max
Product Dimensions:
Length: 40 - 250mm
Width: 20 - 110mm
Height: 10 - 50mm
... | |  | GNA PACKAGING Automatic Tray Denester and Filler with Outfeed Conveyor
Italian Engineering at its best! New GNA
Automatic Tray Denester and Filler with Outfeed Conveyor
This machine is suitable for filling cut salad/baby leaves into trays. It automaticall denests the empty trays, fills products and discharges via outfeed convyeor.
Capacity: Up to 60 trays/min (Product & Tray Size Dependent)
Tray Sizes: 100 - 250 L x 90 - 170 W x 10 - 145 H ... | |  | NEWLONG Bag Sewing Machine on SUS304 Frame with 2.5m Belt Conveyor
Specifications:
Speed: 2700pins/min
Pin Distance: 7-11.5mm (standard 10mm)
Max Sewing Material Thickness: 8mm
Pin: DR-H30#26
Thread Model: Dual-Line
Thread Spec: 20s/6; 20s/9 fiber thread
Lubricating Model: Total sealing (suggest
Mobil Oil 32#)
Thread Cut Model: Pneumatic
Motor Model: Electromagnetism drive
Power: 0.75KW
Voltage: Three-Phase, 415V, 50Hz
Frame: SUS304 ... | |  | GNA PACKAGING Box Overwrapper
Italian Engineering at its best! New GNA WRAP BOX 600 Box Overwrapper
This machine applies films and/or nets over cartons/wooden boxes (option required for applying nets), protecting the products inside the boxes.
Capacity: Up to 30 boxes/min (Product and Box Size Dependent)
Max Film Width: 650 mm
Max Box Size: 600 L x 400 W x 220 H mm
Sealing Method: Hot Melt Glue
Fil ... | |  | MARDEN EDWARDS Overwrapper with front feed conveyor
This MARDEN EDWARDS LX series Overwrapper with front feed conveyor was used for contract packaging.
Pack Length: 50 - 305mm
Pack Width: 25 - 250mm
Pack Height: 1- - 150mm
Speed: 70 overwraps (standard model -maximum for this series, output speed depends on pack size)
Current set up is a 60 x 60 with an adjustable to height to approx. 80mm.
Machine dimensions are 2,300 x 1,200 x 1,850mm
... | |  | FUJI Race Track Marshalling System
This micro computer controlled loop style bucket conveyor has the ability to handle flow rate fluctuations so that product can be accepted at a random flow rate and discharged at a constant rate for maximum capacity, and automating between two pieces of equipment.
The machine was previously used for marshalling flow wrapped) biscuit bar type products from single lane to 10 lane wide blocks in pre ... | |  | TBK Sachet Inserter
This unit is intended to insert sachets, cards etc into horizontal of vertical flow wrapped packages. Being pedestal mounted, it may be set over the top of a wrapping machine infeed, or any other type of "pre wrap" marshalling conveyor.
The unit is provided with a digital counter to provide product run quantity, photocell increment registration (to provide sachet or insert length), and an air cyl ... | |  | GRAN PAX Semi Automatic Doy Pouch Opener (as new)
This semi automatic doy pouch opener was part of a R & D project and has hardly ever been used. Closed, empty pouches are held and presented by a pneumatic feed system.
They are then positioned for opening. Vacuum suction cups open the pouch and then a tamping device opens the bottom of the pouch for filling and/or standing.
Bag Sizes:
Minimum-120mm W x 160mm L
Maximum Size: 180mm W x 20 ... | |  | PFANKUCH Sheet Feeder/Card Inserter
The side-guided magazine holds up to a 20" stack of product and runs at a speed of 380ft minute maximum. The material pile leans slightly forward towards a shape front guide to ensure minimum pressure on the bottom sheet.
The PFANKUCH shaped backrest helps the products to slide gently into the feed position under the unique PFANKUCH contra rotating stripper wheels. Profiled antistatic feed bel ... | | |
|
|
|
|
Single head automatic Screw Capper (Pick & Place)
Screw Capper (Pick and place))
VFFS (Servo Driven)
High Speed Slicer, dicer, strip cutter
Tank (s/s) 200L with lid
Ribbon Blender ( Stainless steel - Painted Outside)
Multihead Weigh Scale (24)