|
|
|
| Metal Detectors Category |
| |
|
 |  | ISHIDA/SQUARE Checkweigher and Metal Detector (No Reject)
SQUARE/ META-HAWK Metal Detector
Aperture Size: 80 H mm x 220mm W
Weighing capacity: 1200g
Weighing range:10 ~1200 g
Weighing accuracy*: ±0.2 g (±0.7 g)
Minimum graduation: 0.1 g
Weigh sensor : Double-beam load cells
Weighing speed*: 210 times/min. (max.)
Weigh conveyor dimensions (mm) 450(L) x 245(W)
Product dimensions Length (mm) 60 ~ 420 (80 ~ 410)
Belt speed 15 ~ ... | |  | NIKKA Metal Detector
This unit is built on a PVC conveyor of belt width 500mm set at 943mm above floor level. The Aperture is 120mm H x 740mm W. The belt is driven by a fractional horse power gear motor chain coupled to the belt header pulley.
An audible alarm is provided to alert the operator of contaminants.
Construction is of Mild Steel and the unit is mounted on jacking screws.
Footprint - Length 1480mm: Width ... | |  | NIKKA DENSOK Metal Detector (Belt Type)
Dust and waterproof metal detector.
Control Unit: MEUZ
Detection Unit: B-300
Effective Height: 100mm
Effective Width: 300mm
Reject System: Alarm & Conveyor Stop
Belt Conveyor Speed: 20m/min (50Hz) 24m/m (60Hz)
Belt Conveyor Length: 800mm
... | |  | NIKKA Metal Detector (Belt Type) Ferrous only
This metal detector was used in the confectionery industry. It detects 1.5fe only.
Aperture Height: 145mm
Belt Width: 250mm
Aperture Width: 380mm
Conveyor belt length: 2000mm L
Height: 800mm above floor
This unit features audible and visual alarms and is mounted on jacking screws and lockable castors.
... | |  | ABM Metal Detector (Drop-Through) with 4 mtrs cable remote
PROUDLY AUSTRALIAN MADE!
This vertical fall or drop through metal detector is commonly used on Form Fill and Seal machines, mounted just above the forming tube, or in other applications for gravity fed free flowing powders, pipeline, liquid or granular materials.
SPECIFICATIONS :
Detector Head weight: 100mm unit is15kg
Detection Sensitivity at Phase Out: 100mm unit:0.7mm mild steel & 1.2mm St ... | |  | LOCK Metal Detector on inclined cleated conveyor
This metal detector with an inclined, created PVC Belt was used in a biscuit factory. The sides are fluted to prevent product spillage
LOCK Metal Detector
Model Metalchek 9
Aperture: 200mm H x 960mm W
Belt Width: 950mm
Belt made of cleated food grade PVC with fluted raised sides.
Incline Angle from 400mm H - 2200mm H
Overall Dimensions: 4600mm L x 1170mm W x 2200mm H
Geared Motor: SEW, 2. ... | |  | DETECTION SYSTEMS Metal Detector with a Retractable Belt
This s/s framed metal detection unit was used in a confectionery plant.
Fitted with a retractable belt
Aperture: 50mm H x 650mm belt Height above ground: 960mm
Electrics: 240AC, 25VA
Mobile - castors fitted with height adjustment ... | | |
|
|
|
|
Single head automatic Screw Capper (Pick & Place)
Screw Capper (Pick and place))
VFFS (Servo Driven)
High Speed Slicer, dicer, strip cutter
Tank (s/s) 200L with lid
Ribbon Blender ( Stainless steel - Painted Outside)
Multihead Weigh Scale (24)