|
|
|
| Meat & Poultry Equipment Category |
| |
|
 |  | IOPAK Automatic Patty Former
THIS DEMONSTRATION MODEL has become available!
Capacity: 2,100 pieces/hr (Product Dependent)
Product Thickness: 8 - 15 mm
Maximum Patty Diameter: 100mm (Round Shape)
Hopper Capacity: 30L
Power: 0.55kW ... | |  | IOPAK Crumbing & Battering / Breading Machine
The new compact s/s IOPAK Crumbing/ Breading & Battering machine has proved highly popular because of its exceptional.
performance and LOW, LOW PRICE!
IOPAK Model BB-400,
Width: 400mm
Capacity: 250-500kgs/hr (product dependent)
Power:
3 phase, 415v, 50hZ
Horsepower:
Batter Coating Machine: 0.8kW
Crumb Coating Machine: 2.0kW
Size:
Batter Coating Machine: 1255L x 925W x 1070H ... | |  | TOACO Fish Skinner / Denuder/Scaler
This unit is fitted with a "Saw Tooth" (2.5mm pitch) cross section serrated roller of approximately 70mm OD.
The roller has peripheral slots machined at 8mm centers across the entire width, and intermeshing counter rotating fingers (mounted under the table) provide a continuous cleaning operation. The roller is fitted into a bench 720mm L x 300mm W.
All wetted parts are fabricated of stain ... | |  | SHONAN Frozen Block Cutter
The SHONAN Frozen block cutter handles a whole frozen block of material at a time.
Throughput: 2200-2800 kg/hr
Opening of Throat: 600 (L) x 500 (W) x 270 (H) mm
Cutting Thickness/Product Temp Comparison:
Within 2mm: -15 degrees or less
Within 3mm: Up to -15 degrees
Within 5mm: Up to -10 degrees
Within 7mm: Up to -8 degrees
Within 10mm: Up to -5 degrees
Types of Frozen Materials whi ... | |  | AKIYAMA Frozen fresh fish splitter
This is an AKIYAMA used Frozen fresh fish automatic splitter machine
Fish of any shape are cut in two finely and quickly.Small size to a medium size fish in particular!
High yield is acheived by means of a very thin blade.
Increased efficiency can be maximised by utilising a special speed adjusting device.
An emergency stop device assists in ensuring safe product handling.
Cuts finely from ... | |  | CFS WOLFKING Meat Pump
The CFS WOLFKING VanePump is a positive displacement pump with radially moving vanes.
It is designed for all-round pumping applications such as ground meat and trimmings, emulsions and pre-blends, dairy products, dough and vegetables ... | |  | FORMAX Patty Former (Mid-Capacity) with hoist, interleaver, knock plate and cups
This rarely available FORMAX forming machine has just become available.
The machine has had one owner since it was purchased new in 2004, and has done only 5,000 hours. It comes with paper interleaving (paper feeder) as well a new knock plate and cups. The machine is currently set up for 50gram burgers.
The F400 was the first “metric” former from FORMAX.
The PLC controlled F-400 combines t ... | | |
|
|
|
|
Bank of 3 jacketed tilting cookers
Single head automatic Screw Capper (with cap elevator)
VFFS (Servo Driven)
High Speed Slicer, dicer, strip cutter
Tank (s/s) 200L with lid
Ribbon Blender ( Stainless steel - Painted Outside)
Multihead Weigh Scale (24)